The Steel Guitar Forum Store 

Post new topic What's this part?
Reply to topic
Author Topic:  What's this part?
J Hill

 

From:
Colorado, USA
Post  Posted 9 Mar 2005 6:30 pm    
Reply with quote

Could someone tell me what the metal part of the lap steel is called that is on the far right end that the strings lay in, in grooves, to keep them in place and equally spaced? Thank you,

Leila
View user's profile Send private message Send e-mail

Steinar Gregertsen


From:
Arendal, Norway, R.I.P.
Post  Posted 9 Mar 2005 6:42 pm    
Reply with quote

That would be the bridge.

Steinar

------------------
www.gregertsen.com


View user's profile Send private message Send e-mail Visit poster's website

J Hill

 

From:
Colorado, USA
Post  Posted 9 Mar 2005 6:55 pm    
Reply with quote

Thanks Steiner,

I was just trying to prove that there IS such a thing as a stupid question. Just wish I hadn't been the one to ask it.

Just in case someone else comes in here, I've heard the Fender Stringmaster laps are pretty lightweight. From what I'm reading here on the Forum, I'm seeing a lot of good things said about the ones made in the 50's. Are they better than the ones Fender made in the 60's and 70's? Thanks,

Leila

View user's profile Send private message Send e-mail

HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 9 Mar 2005 7:06 pm    
Reply with quote

Quote:
I was just trying to prove that there IS such a thing as a stupid question



and I've proven numerous times that there is such a thing as a stupid answer.
View user's profile Send private message Send e-mail

J Hill

 

From:
Colorado, USA
Post  Posted 9 Mar 2005 7:46 pm    
Reply with quote

HowardR,

Thanks for your empathy. Yes, misery does love company, so thanks for sharing my shame. I sure have a lot to learn, and its great having the search option and all those past posts to learn from, but sometimes I think I just need some bare bones basics.
View user's profile Send private message Send e-mail

George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 9 Mar 2005 8:08 pm    
Reply with quote

That would be the bridge. Hmmm...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"They met on the bridge at midnite,
But they'll never meet again...
For one was an east bound heffer,
The other, a west bound train!"
View user's profile Send private message

J Hill

 

From:
Colorado, USA
Post  Posted 9 Mar 2005 8:23 pm    
Reply with quote

George,

Now if we can't just keep this whole conversation at the high intellectual caliber with which it began I don't know what I'm going to do.

Did the cow survive?
View user's profile Send private message Send e-mail

Travis Bernhardt

 

From:
Vancouver, British Columbia, Canada
Post  Posted 9 Mar 2005 8:29 pm    
Reply with quote

Here's one that I've always wondered. When is it a saddle and when is it a bridge?

-Travis
View user's profile Send private message Send e-mail

J Hill

 

From:
Colorado, USA
Post  Posted 9 Mar 2005 9:19 pm    
Reply with quote

Its a saddle when its on a horse, not a cow. (And you thought I had limited knowledge.) ha!

[This message was edited by Leila Tuttle on 09 March 2005 at 09:19 PM.]

View user's profile Send private message Send e-mail

Rick Alexander


From:
Florida, USA, R.I.P.
Post  Posted 10 Mar 2005 4:19 am    
Reply with quote

Saddles are those adjustable thingys that individual strings rest on. The bridge is the whole entire apparatus.
View user's profile Send private message Send e-mail Visit poster's website

Howard Tate


From:
Leesville, Louisiana, USA, R.I.P.
Post  Posted 10 Mar 2005 6:41 am    
Reply with quote

"Thingys". I love that technical talk.

------------------
Howard, 'Les Paul Recording, Zum S12U, Vegas 400, Boss ME-5, Boss DM-3
http://www.Charmedmusic.com


View user's profile Send private message Send e-mail Visit poster's website

Karl Oberlander

 

From:
Austin, Texas, USA
Post  Posted 10 Mar 2005 7:12 am    
Reply with quote

Back to the stringmaster question for a minute. I have several both 50's and 60's single, double and triple necks. I believe there are differences in tone due to the age of the pickups and seasoning and maybe differences in the wood used. There is also some difference in tone from the number of necks. This may be due to the overall mass of the amount of wood in each. But is one better than another? Hard to say as I see that as individual taste. I like the tone of my '59 single neck best and the '57 triple neck after that. My '62 double has a totally different tone but it still is very hearty. So I guess you'd have to say it's subjective. Could have something to do with the amp (Vintage Fender) as well and the room size (small).

Oh well, just my two cents worth.

I recommend the stringmaster if you can get one.

Kobe

------------------
Gibson D-8 Console Grande - Stringmaster T-8 - Alkire EHarp D-10
Fender Super Reverb
kobe@austin.rr.com
http://home.austin.rr.com/kobeco


View user's profile Send private message Send e-mail

Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 10 Mar 2005 10:05 am    
Reply with quote

Bridge, nut, binding post, fahnstock clips, terminal strip, used 'em all...

What's the last thing to pass thru the bumblebee's mind as he hits your windshield at 70 MPH?

[This message was edited by Ray Minich on 10 March 2005 at 10:06 AM.]

[This message was edited by Ray Minich on 10 March 2005 at 10:07 AM.]

View user's profile Send private message Send e-mail

Jim Cohen


From:
Philadelphia, PA
Post  Posted 10 Mar 2005 10:22 am    
Reply with quote

Umm... a burst of air?
View user's profile Send private message Send e-mail Visit poster's website

Mark Vinbury

 

From:
N. Kingstown, Rhode Island, USA
Post  Posted 10 Mar 2005 11:04 am    
Reply with quote

Which Stringmaster don't matter to this Stingmaster no more.
View user's profile Send private message Send e-mail Visit poster's website

J Hill

 

From:
Colorado, USA
Post  Posted 10 Mar 2005 12:01 pm    
Reply with quote

Karl,

Your answer helped. I guess its a matter of what one's ears like to hear. Although I'm glad you didn't say any particular decade was better than another in Fender's tone making business.

Now I just don't understand what bees have to do with bridges and cows.
View user's profile Send private message Send e-mail

Stephan Miller

 

From:
Silver Spring, Maryland, USA
Post  Posted 10 Mar 2005 1:15 pm    
Reply with quote

Ray-- that would be his bee-hind, I'll bet.
View user's profile Send private message Send e-mail

Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 10 Mar 2005 2:24 pm    
Reply with quote

Stephan wins! Leila, I and a few others here laughed pretty hard at the cow poem, just had to add something to continue the levity
View user's profile Send private message Send e-mail

John Bechtel


From:
Nashville, Tennessee, R.I.P.
Post  Posted 14 Mar 2005 11:07 pm    
Reply with quote

The only recent steel that I've seen with grooves over both the Nut ‘and Bridge’ is the Remington Steelmaster! Are there any others? Usually the Bridge-Spacing is determined by the Anchor-Point!! I have a Website for questions like this, but; my site didn't come with built-in answers¡

------------------
“Big John” Bechtel
’49-’50 Fender T–8 Custom
’65 Re-Issue Fender Twin–Reverb Custom™ 15” Eminence
View user's profile Send private message Send e-mail

Charlie McDonald


From:
out of the blue
Post  Posted 24 Mar 2005 5:09 am    
Reply with quote

Here's a song my dad used to sing (he played it on the piano, only on the black keys):
Bill Grogan's goat was feelin fine;
Ate three red shirts right off the line.
Bill took a stick and broke his back;
And tied him to a railroad track.

The whistle blew, the train drew nigh;
Bill Grogan's goat was bound to die.
The goat cried out in mortal pain,
Coughed up the shirts and flagged the train.

Now if it just had a bridge, it'd make a great steel tune!
View user's profile Send private message Send e-mail

J Hill

 

From:
Colorado, USA
Post  Posted 24 Mar 2005 6:47 am    
Reply with quote

Charlie,

That was a wonderful poem.

How well I remember the only song my Dad could play on the piano, "Nobody loves me, everybody hates me, I'm goin out an eat worms!"........ He sang it too!
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP