The Steel Guitar Forum Store 

Post new topic Tape to Computer?
Reply to topic
Author Topic:  Tape to Computer?
John McConnell


From:
Yuba City, CA, USA (deceased)
Post  Posted 21 Dec 2006 6:25 am    
Reply with quote

I have a four track recording I made of my band a few years ago and I would like to use the computer and the cakewalk program to mix it a little better. It was recorded on a Tascam 424 mkIII and has four channels of output. Any suggestions on a hardware deveice to transfer it to the computer.

John McConnell
Yuba City, CA
Sho-Bud Professional-Peavey Nashville 100
View user's profile Send private message

Jack Stoner


From:
Kansas City, MO
Post  Posted 21 Dec 2006 7:39 am    
Reply with quote

You can connect the Tascan directly to the "Line In" on the PC. It has a high enough level for PC recording.

I used to have a Tascam and mixed down to the PC that way.

If you don't have a recording program for the Line In, do a google search for "Audacity" and download and install the free recording program.
View user's profile Send private message Send e-mail

Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 21 Dec 2006 11:07 am    
Reply with quote

Now, perhaps the 4 track unit has 4 output channels, corresponding to the 4 individual tracks of music stuff on the tape.

There is only a stereo input to the soundcard, that is, 2 channels in.

Can one record 2 channels worth of stuff in the first pass, then record the other two channels of stuff in a 2nd recording, then "slip & slide" them all together to syncronize them in a multichannel mixing/editing PC program? This would retain the individuality of the 4 recorded tracks on the tape...
Is this a possible scenario?

[This message was edited by Ray Minich on 21 December 2006 at 12:28 PM.]

View user's profile Send private message Send e-mail

Jack Stoner


From:
Kansas City, MO
Post  Posted 21 Dec 2006 12:39 pm    
Reply with quote

Not really without some more sophisticated recording software.

However, if you mix it down to the PC you can come out with two channels.

I used to mix the 4 channels down to two with the Tascam and at the same time record the two channels on the PC.
View user's profile Send private message Send e-mail

Bryan Daste


From:
Portland, Oregon, USA
Post  Posted 21 Dec 2006 1:58 pm    
Reply with quote

You could transfer 4 tracks in 2 passes (2 tracks at a time), but sync might be a problem. What I would do (if possible) is record a short tone on all 4 tracks at the beginning of the tape, before the program starts. Some tape machines have a tone generator; you can just put all 4 tracks in record and roll tape for a second or less. Then when you have all your tracks on the computer, you can line the tone up visually. Try it!
View user's profile Send private message Send e-mail Visit poster's website

Jim Peters


From:
St. Louis, Missouri, USA, R.I.P.
Post  Posted 21 Dec 2006 2:10 pm    
Reply with quote

M audio has a 4 in interface that would work perfectly for your purpose. here's a link:

wrong link, see next post

[This message was edited by Jim Peters on 21 December 2006 at 04:39 PM.]

View user's profile Send private message Send e-mail Visit poster's website

Bryan Daste


From:
Portland, Oregon, USA
Post  Posted 21 Dec 2006 3:24 pm    
Reply with quote

Jim, it looks like that M-Audio interface only has 2 analog ins - the other 2 are digital (SPDIF), which won't help in this case. John, I forgot to ask, what kind of interface do you have now? Are you going straight in to your computer's soundcard?

As a side note, I live in Portland, but I'm visiting my wife's family in Chico, CA, right now...not far from Yuba City! I'll be in Yuba on the 24th. Small world.

------------------
Sierra "HJ Custom" D-10, Peavey Session 500, Goodrich L10k, Line 6 DL4, Boyett's Glass Bar
View user's profile Send private message Send e-mail Visit poster's website

John McConnell


From:
Yuba City, CA, USA (deceased)
Post  Posted 21 Dec 2006 4:10 pm    
Reply with quote

Right now I do not have any interface. I just am at the stage of looking at my computer and then looking at my tape deck and wondering if there is a way to get them together. I have seen an interface called Aardvaark. Does anyone have expierience with these? John
View user's profile Send private message

Jim Peters


From:
St. Louis, Missouri, USA, R.I.P.
Post  Posted 21 Dec 2006 4:38 pm    
Reply with quote

Oops, wrong product-try this:
http://www.musiciansfriend.com/product/MAudio-Delta-44-Digital-Recording-System?sku=701346
View user's profile Send private message Send e-mail Visit poster's website

Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 21 Dec 2006 4:46 pm    
Reply with quote

John:A few posts down is a $30.00 behringer audio interface that might do the trick,it goes into a USB port,you can only record 2 tracks at a time so as Bryan said you would have to do it in two passes.I have one it works great,and you don't need to install any drivers.Stu
View user's profile Send private message Send e-mail

Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 21 Dec 2006 5:10 pm    
Reply with quote

1. The Aardvark stuff is first rate, I have the directpro 24/96,, very well sheided, great stuff. The drivers are working on xp pro sp2. low-z, hi-z , builtin dsp fx can be recorded or just used for headphone mix.

2. aardvark was out of busness last tim i checked, so no support.

googling yielded http://www.petitiononline.com/aardvark/petition.html
View user's profile Send private message Send e-mail

David L. Donald


From:
Koh Samui Island, Thailand
Post  Posted 21 Dec 2006 10:15 pm    
Reply with quote

If you have only two inputs and 4 tracks to record,
one workaround is to put a single note
like a snare hit or simple synth note
on all 4 tracks,
then record two and two again with this reference to time.

Before or after the song is fine.
Where ever you have space to not erase program music.

After it is digitised, you can go to that
single multi track reference to time,

look at this note at highest resolution
and slide the 2nd two tracks into time with the 1st two.

As long as no changes were made in the digitising freq between recordings,

and the time reference tone was record
on ALL tracks at the same time,

it will line up perfectly.

I do this regularly if needed.

If you try and record a whole album after the tone like this,
you might have tape machine speed variations to deal with,
but one or even two songs in a row would not be a problem.

[This message was edited by David L. Donald on 21 December 2006 at 10:18 PM.]

View user's profile Send private message Send e-mail Visit poster's website

John McConnell


From:
Yuba City, CA, USA (deceased)
Post  Posted 22 Dec 2006 6:30 am    
Reply with quote

Thanks to everyone for their input. I now have some ideas. I really appreciate everyone taking time to reply and sahring their expertise. Boy how I love this forum. Happy Holidays to you all and I will post my results after I get going on this project. The original tape is really pretty good except that our Tenor Sax man has a problem in that when he ois not playing, he is talking. The band is one without steel or any guitars. I am playing stanup bass and the line up is Keyboard, Sax Bass and Drums. It was a great little band but we all got too old. Thanks again and Merry Christmas to you all. John
View user's profile Send private message

Craig Stenseth


From:
Naperville, Illinois, USA
Post  Posted 22 Dec 2006 7:30 am    
Reply with quote

I don't think you're going to get the results you want by making 2 passes with the tape, 2 tracks at a time. If possible, run 2 of the tracks into one computer's line input, and the other 2 tracks into the line input of a 2nd computer. Then copy the (stereo) file onto the first computer, and combine (using Audacity or some other program). Tapes have too much wow and flutter to play something the same way twice (i.e. sounds okay until you try to line it up with the other parts of the same recording).
View user's profile Send private message Send e-mail Yahoo Messenger

David L. Donald


From:
Koh Samui Island, Thailand
Post  Posted 23 Dec 2006 1:54 am    
Reply with quote

Craig,
that's why I said leave the recorded time short,
not the whole tape.
Wow and flutter will be there anyway.
usually on the tape at the same spot,
it is time slippage that is the main issue with this.

Remember this is a work-around if you can't afford a 4 channel interface,
or have no access to one.

If it is done for one song,
and quickly do the other,
there should not be an exorbitant amount
of time difference. 10 minutes is typically the max.
But that depends on tyhe tape machines

If he can afford two computers
and the same program and another interface...
he can afford to buy a 4 input interface...

Maybe gets questionable for multitrack cassette tapes,
but a reel to reel that is not on deaths door,
will do this ok.

I have done it many times.
View user's profile Send private message Send e-mail Visit poster's website

Jay Ganz


From:
Out Behind The Barn
Post  Posted 23 Dec 2006 7:26 am    
Reply with quote

John,
The Lexicon Omega set up will also solve your problem. You can record 4 tracks at once and
remix them with the Cubase LE software that comes with it. It also includes Lexicon Pantheon reverb if you want to add some.

View user's profile Send private message Send e-mail Visit poster's website

Randy Cordle


From:
Illinois, USA
Post  Posted 24 Dec 2006 3:40 pm    
Reply with quote

Hi, John.
Yes, You can do two tracks at a time ,although not ideal due to the "wow" that invariably results in your transferred tracks ending up having different lengths. Follow the instructions given for adding a visual clue to all of the tracks so you can time align them in your software. A "click" at the end of the track is also useful, but not necessary. I've done this a few times and use a "clicker" purchased at any pet supply store. It's used for training dogs. It produces a nice "spike" on the waveform so you can easily slip the tracks into alignment. If one pair is shorter than the other pair you can use a time stretching function (often a function of the audio editing program) to perfectly adjust the track length. This will automatically speed up or slow down the track to match the other track pair pitch. It will be only a microtonal amount, but if they are not matched you'll end up with phasing effects that won't be pretty. Good luck!
View user's profile Send private message Send e-mail Visit poster's website

Gary Shepherd


From:
Fox, Oklahoma, USA
Post  Posted 25 Dec 2006 5:08 pm    
Reply with quote

John, if you want to send me the tape and your 4 track player, I can record it to Sonar (wave files) for you and send it back.

With only 2 inputs on your sound card, your options are limited. Either record all for tracks in 2 passes (in which case you can have tape sync issues) or record all four tracks in one pass but you'll end up with less mixing ability later.

My system has 24 ins/outs so 4 tracks would be no problem here.

Of course, it would probably be cheaper (shipping charges) to try two passes on your system first. You might still be able to get the 4 tracks to line up right.

If you need help, send me an email.

------------------
Gary Shepherd

Carter D-10

www.16tracks.com
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP