| Author |
Topic: Question Mike Brown Peavey Nashville 400 |
J Hollenberg
From:
Vlaardingen, The Netherlands
|
Posted 27 May 2004 5:22 am |
|
I have send 2 emails 2 and 3 days ago to Peavey in the States but I haven't heard anything yet.Maybe you can help me .
It concerns the pre gain potmeter with the pull bright switch in it. On the diagram it seems to be partnr 71190414
The problem is that the amp a Nashville 400 sometimes makes a lot of noise ( very loud ), but when I am messing around with the pre gain pot it goes away.
Also when I use the pull bright switch sometimes it makes a very loud clicking sound.
Can I use contactspray to clean it or should I replace it.
If it should be replaced what does it costs aproximately with airmailcosts and can I pay by creditcard.
Hope to hear from,
Sincerely,
Jack Hollenberg
The Netherlands
jhollenberg@planet.nl
------------------
|
|
|
|
J Hollenberg
From:
Vlaardingen, The Netherlands
|
Posted 27 May 2004 6:18 am
|
|
Just received a message from Peavey USA with a possible solution.
I can try to clean the pot with a contactspray.
I am going to try this.
Jack Hollenberg
The Netherlands
------------------
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 27 May 2004 7:35 am
|
|
I just spoke with a tech and the pre gain pull pot for the Nashville is no longer manufactured. The best advice is to clean the pot with Cramolin R5 DeOxit contact cleaner/lubricant or Peavey Funk Out contact spray.
You can check with our distributor for the Netherlands, which I have listed below;
Peavey UK
Great Folds Rd.
Oakley Hay
Corby
Northants NN18 9ET
United Kingdom
phone; 44-1536-461234
e-mail; support@peavey-eu.com
Hope that this helps.
Mike Brown
Peavey Electronics Corporation |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 27 May 2004 11:29 am
|
|
Jack, I have 2 of these, brand new and would be happy to ship you one.
Check your email for details.
Bill |
|
|
|
