Pops on Ernie Ball Volume Pedal

John McConnell · From: Yuba City, CA, USA (deceased)

I am using an Ernie Ball Volume Pedal going into a Boss GX-700 processor into a Music Man Tube Amp(HD-130). I have started getting loud pops when using the volume pedal but no problems when I set the pedal at one level and don't touch it. Any Ideas out there?
John McConnell (ShoBud D10)

Ricky Davis · From: Bertram, Texas USA

You can spray the Pot with contact cleaner and that should get rid of the popping for a while. You will eventually need to replace the pot; which is only about 20 or so dollars. Have fun.

------------------
Ricky Davis
ICQ# 62060713
http://hometown.aol.com/sshawaiian/RickyHomepage.html
http://users.interlinks.net/rebel/steel/steel.html
sshawaiian@aol.com

ajm · From: Los Angeles

It's probably the pot, but if not maybe you have an intermittent cord thats shorting out or something when you move your foot.

John McConnell · From: Yuba City, CA, USA (deceased)

Thanks for the tips. I tried cleaning the pot with a spray cleaner and that seemed to do the trick. Thanks Again, John

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: