| Author |
Topic: hilton volume pedal for keyboards? |
David Cook
From:
Florida, USA
|
Posted 17 Apr 2024 8:49 am |
|
will this work or is the impedance not right
Thanks,David |
|
|
|
John Larson
From:
Pennsyltucky, USA
|
Posted 17 Apr 2024 8:56 am Re: hilton volume pedal for keyboards?
|
|
| David Cook wrote: |
will this work or is the impedance not right
Thanks,David |
Gonna depend on how hot the output on the keyboard is most likely.
_________________
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5 |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 17 Apr 2024 2:04 pm
|
|
I used my Hilton with a Korg Triton I used to have, and it did fine with no issues at all.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Mike Auman
From:
North Texas, USA
|
Posted 17 Apr 2024 2:16 pm
|
|
It depends on what's next in the signal chain. Will the output of the volume pedal go to a guitar amp (with input impedance ~ 1meg ohms)? If so, a steel volume pedal (100k ohms) is fine. But if the output of the volume pedal is going to a keyboard amp or directly to a mixer (input impedance as low as 10k to 100k ohms), that won't work, and you'll need a low-impedance volume pedal (Boss FV-50L, FV-30L or similar.) In this case, "that won't work" means "it will load down the signal way too much," not "you won't hear anything at all."
_________________
Long-time guitar player, now wrestling with lap steel. |
|
|
|
