The Steel Guitar Forum Store 

Post new topic Acoustic Guitar Simulator
Reply to topic
Author Topic:  Acoustic Guitar Simulator
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 3 Mar 2024 12:50 pm    
Reply with quote

A friend of mine injured a couple of fingers on his left hand a few years ago. They are as healed as much as they will; but, it's getting harder and harder for him to play his acoustic guitars.

I'm wondering if maybe he should switch over to a solid body electric guitar, with lighter strings/action, and use an acoustic guitar simulator.

I was just looking at a simulator made by NUX. It is way over complicated for this guy.

Any thoughts?

By the way, this is strictly for chord strumming.

~Lee
View user's profile Send private message Send e-mail

Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 3 Mar 2024 12:59 pm    
Reply with quote

Perhaps there are acoustic/ electric guitars with an electric guitar neck?
View user's profile Send private message Send e-mail

Mike Auman


From:
North Texas, USA
Post  Posted 3 Mar 2024 1:28 pm    
Reply with quote

It's not so much the neck as the action, since acoustic guitars often have higher actions than electrics.
For a left hand injury, there are some possible ways to make his current acoustic guitars easier to fret:

1. Tune down one fret and put a capo on the 1st fret. Some acoustic guitars have an excessively high nut to prevent buzz, requiring more finger strength unless you add a capo.
2. Have a luthier set up the guitar for the lowest possible action, including nut height, saddle height, neck relief, and string gauge.
3. Replace the nut with a Zero Glide nut, which is a zero-fret, giving you the same lower action as a capo. Best done by a luthier for acoustic guitars, there are different models and sizes for different guitar brands. Neck relief may need to be adjusted, but not usually.
_________________
Long-time guitar player, now wrestling with lap steel.
View user's profile Send private message Send e-mail

Chris Templeton


From:
The Green Mountain State
Post  Posted 6 Mar 2024 5:08 am    
Reply with quote

Nylon string guitar?
_________________
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
View user's profile Send private message

Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 6 Mar 2024 8:38 pm    
Reply with quote

I have a Godin Multiac steel string acoustic electric. It has a thin chambered body and plays as good as most electrics. It has a nice acoustic electric sound. They pop up pretty often on Ebay and Reverb.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, as well as some older MSAs, several amps, new and old, and a Kemper Powerhead that I am really liking. Recently added a Zum D10, a Mullen RP, and a restored blue Rose, named the "Blue Bird" to the herd. Also, I have acquired and restored the plexiglass D10 MSA Classic again that was built as a demo in the early '70s. I also added a '74 lacquer P/P, with wood necks.
View user's profile Send private message Send e-mail

John Larson


From:
Pennsyltucky, USA
Post  Posted 7 Mar 2024 3:27 am    
Reply with quote

Taylor T5
_________________
Rejoice in the Lord, O ye righteous; praise is meet for the upright. Give praise to the Lord with the harp, chant unto Him with the ten-stringed psaltery. Sing unto Him a new song, chant well unto Him with jubilation. For the word of the Lord is true, and all His works are in faithfulness. The Lord loveth mercy and judgement; the earth is full of the mercy of the Lord.
- Psalm 33:1-5
View user's profile Send private message

Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 7 Mar 2024 5:08 am    
Reply with quote

I’ve had two Taylor T5’s and I never could get an acoustic sound I liked, the Godin gave me that sound right out of the box. I’ve had a couple of Taylor acoustics with the new, three knob preamp (I forget what they call it) and I never cared for them either. I like Taylor’s old Fishman preamp/EQ system much better.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, as well as some older MSAs, several amps, new and old, and a Kemper Powerhead that I am really liking. Recently added a Zum D10, a Mullen RP, and a restored blue Rose, named the "Blue Bird" to the herd. Also, I have acquired and restored the plexiglass D10 MSA Classic again that was built as a demo in the early '70s. I also added a '74 lacquer P/P, with wood necks.
View user's profile Send private message Send e-mail

Walter Killam


From:
Nebraska, USA
Post  Posted 7 Mar 2024 8:43 pm     Try a Zager
Reply with quote

I love my Zager ZAD50 ez play guitar. It doesn't project like a Martin, but with decent pickup installed all I have to do is turn up the volume.

In addendum, I use a boss acoustic simulator on my pedalboard, in conjunction with splitting the neck coil, and trying to remember to play like an acoustic rhythm guitar it does a passable job, but it's not the same as my Zager, I can tell it's a simulator.

YMMV
_________________
Mostly junque with a few knick-knacks that I really can't do without!
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP