The Steel Guitar Forum Store 

Post new topic First home-built lap steel
Reply to topic
Author Topic:  First home-built lap steel
Andy Henriksen

 

From:
Michigan, USA
Post  Posted 21 Nov 2017 7:13 pm    
Reply with quote

I started this thing in January. I nearly had to do everything twice and several things 3 times, to figure out the right way to get what I wanted, but I mostly got there. There are several visible flaws that are all my doing, but it’s all asthetic stuff, so I can cope.

It sounds real nice based on the first 5 minutes of playing. The lollar console grande pickup has a clear chimey attack, and a rich tone. Sustain seems decent, but I haven’t A/B’d against my other guitars.










Bah! Sorry about the upside down pics. They were right before I uploaded em...


Last edited by Andy Henriksen on 21 Nov 2017 9:22 pm; edited 2 times in total
View user's profile Send private message Send e-mail

Ron Simpson

 

From:
Illinois, USA
Post  Posted 21 Nov 2017 7:24 pm    
Reply with quote

Beautiful work.
View user's profile Send private message Send e-mail

Ken Campbell

 

From:
Ferndale, Montana
Post  Posted 21 Nov 2017 8:27 pm    
Reply with quote

Most impressive!
View user's profile Send private message Send e-mail

Mick Hearn

 

From:
United Kingdom
Post  Posted 21 Nov 2017 11:22 pm    
Reply with quote

Very nice. What diameter rod are you using for the bridge?
_________________
ShoBud 6139, Remington Steelmaster D8, National D8 Console x 2, George Boards Lap Steel, National New Yorker.
View user's profile Send private message Send e-mail

Tim Russell


From:
Pennsylvania, USA
Post  Posted 22 Nov 2017 1:56 am    
Reply with quote

Looks awesome!
_________________
Sierra Crown D-10
View user's profile Send private message

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Nov 2017 4:03 am    
Reply with quote

Thanks everyone!

Mick Hearn wrote:
Very nice. What diameter rod are you using for the bridge?

1/2”. The bridge and nut are both made from cheap aluminum stock from Lowes or HD.
View user's profile Send private message Send e-mail

Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 22 Nov 2017 4:44 am    
Reply with quote

Very nice build Andy. Did you use walnut and maple?
What do you mean...upside down picture? Isn't that the bottom????? Laughing
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail

Joe Elk


From:
Ohio, USA
Post  Posted 22 Nov 2017 4:54 am    
Reply with quote

Very nice Andy!!
Joe Elk Central Ohio
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Nov 2017 5:53 am    
Reply with quote

Bill Groner wrote:
Very nice build Andy. Did you use walnut and maple?
What do you mean...upside down picture? Isn't that the bottom????? Laughing

d'oh! Laughing

Yeah, black walnut and sugar maple. I still have about 6' of the maple slab left, so I'm sure another something will come of that someday.
View user's profile Send private message Send e-mail

Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 22 Nov 2017 6:48 am    
Reply with quote

That's quite lovely! The bridge design is very aesthetically pleasing. Strings held in their spot by tension I assume, or is it slotted?

The fretboard looks like it was slotted with maple fillers, is that the case?

Someday I'll take a swing at doing this. I've built a lot of Warmoth guitars (cheating, I know) so it's a little trickier given my lack of woodworking expertise and equipment, but we'll see, maybe someday (or I'll pilfer an old body and use it as a base).
View user's profile Send private message Send e-mail

Larry Phleger

 

From:
DuBois, PA
Post  Posted 22 Nov 2017 7:47 am    
Reply with quote

Beautiful job, Andy. What tuning are you using on it? Very Happy
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Nov 2017 9:00 am    
Reply with quote

Nic Neufeld wrote:
That's quite lovely! The bridge design is very aesthetically pleasing. Strings held in their spot by tension I assume, or is it slotted?

The fretboard looks like it was slotted with maple fillers, is that the case?

Someday I'll take a swing at doing this. I've built a lot of Warmoth guitars (cheating, I know) so it's a little trickier given my lack of woodworking expertise and equipment, but we'll see, maybe someday (or I'll pilfer an old body and use it as a base).


bridge isn't slotted (probably should be). And yep - the "frets" and dots are maple. For the dots, I made a rough "pencil" out of maple at the saw and router table, then sharpened it in an electric pencil sharpener, which made the perfect tapered plugs.

I was several years in the thinkin' phase of this before I actually bought a piece of wood. It was fun, and super frustrating at times! I won't be doing another one soon, but when I do, it should be much faster and easier.

Larry, my default is C6 w/ a high G. But I'm thinking of trying (again) A6 on this.
View user's profile Send private message Send e-mail

Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 22 Nov 2017 9:24 am    
Reply with quote

Andy, what finish did you use on it? That picture of the bottom side, the darn thing looks perfect. Very Happy
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Nov 2017 9:28 am    
Reply with quote

Bill Groner wrote:
Andy, what finish did you use on it? That picture of the bottom side, the darn thing looks perfect. Very Happy

Thanks! It has a dozen very light coats of "tung oil finish" with high grit paper up to #0000 steel wool in between. Topped it off with some paste wax.
View user's profile Send private message Send e-mail

Paul Arntson


From:
Washington, USA
Post  Posted 22 Nov 2017 9:53 am    
Reply with quote

Beautiful! I bet it sounds as good as it looks!
_________________
Excel D10 8&4, Supro 8, Regal resonator, Peavey Powerslide, homemade lap 12(a work in progress)
View user's profile Send private message Send e-mail

Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 22 Nov 2017 10:38 am    
Reply with quote

Tung oil finish, is that the Formby's varnish blend? I've used that for a number of guitars and generally liked my results from it. Yours seems to have an especially nice finish though (mine occasionally seemed a bit rough in comparison), with somewhere between a satin and gloss effect...
View user's profile Send private message Send e-mail

Andy Henriksen

 

From:
Michigan, USA
Post  Posted 22 Nov 2017 11:21 am    
Reply with quote

Nic Neufeld wrote:
Tung oil finish, is that the Formby's varnish blend? I've used that for a number of guitars and generally liked my results from it. Yours seems to have an especially nice finish though (mine occasionally seemed a bit rough in comparison), with somewhere between a satin and gloss effect...

Yep - Formby's. The finish is not quite as nice in person, for sure. Certain areas are duller/less glossy than others. And I have a lot of little scratches that I think happened just sliding around on the bench during sanding and stuff (custom relic job). But it still looks pretty nice. Thanks!
View user's profile Send private message Send e-mail

Steven Cummings

 

From:
Texas
Post  Posted 23 Mar 2018 4:19 am    
Reply with quote

Yep.... it is purdy!
Can you tell us more about how you did the machine head and how you joined it all to the neck?

Nicely done mate
_________________
Lookin' on the sunny side....
View user's profile Send private message Send e-mail

Chris Walke

 

From:
St Charles, IL
Post  Posted 23 Mar 2018 4:50 am    
Reply with quote

Looks real nice to me! Beautiful work.
View user's profile Send private message Send e-mail

George Piburn


From:
The Land of Enchantment New Mexico
Post  Posted 23 Mar 2018 5:47 am     Awesome Build
Reply with quote

Congratulations Awesome Build looks dandy.

1 constructive comment = if you invest into real brass nut and bridge parts same exact design just better material, your over all tone will be completely better to an extreme extent.

The home center aluminum is low quality for steel guitar parts , for Aluminum you want 6061 alloy , Brass 360 or 385 alloy. Both can be found online in short stock cuts. eBay is a good resource for short stock too.
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP