The Steel Guitar Forum Store 

Post new topic ZB C6 pedal 5
Reply to topic
Author Topic:  ZB C6 pedal 5
Don Balding

 

From:
Oklahoma
Post  Posted 17 Oct 2017 5:05 pm    
Reply with quote

hoping someone has suggestion.
I have a ZB D-11 I bought used long ago to explore the C6 neck.
The C6 pedals had many problems and were not setup to the standard codependent.
with no luck getting the pedal pulls in sync i removed all the rods and started over.
Using some of the pictures of the ZB undercarriage that I found in the Forum I started over.
I got all of the pulls in sync except the 5th pedal.As the pedal is depressed the pull for the 5th string lower pulls but the 3 raises do not begin until the 5th string has hit its limit.I have moved the rods and bell cranks to to every position with no luck.Am i missing something???

View user's profile Send private message Send e-mail

Bob Hamilton

 

From:
California Central Coast
Post  Posted 17 Oct 2017 8:44 pm     zB
Reply with quote

Tighten the spring on the 5th string lower.
View user's profile Send private message Send e-mail

Don Balding

 

From:
Oklahoma
Post  Posted 18 Oct 2017 7:02 am    
Reply with quote

Thanks Bob
that helped,had to tighten spring almost to max.
Now string 1 pulls with string 5 but string 9 and 10 dont pull until 1 and 5 reach their limit.
not knowing the C6 neck (yet)just wondering how often would string 1, 5,9 and 10 be used together.
View user's profile Send private message Send e-mail

Bob Hamilton

 

From:
California Central Coast
Post  Posted 18 Oct 2017 9:14 am     Zb
Reply with quote

Don, balance the string pairs with the small crossbars, then balance the string groups on the larger crossbar. Don't forget to use the center mounting screw for balancing too. Time consuming for sure, good luck, BH
View user's profile Send private message Send e-mail

b0b


From:
Cloverdale, CA, USA
Post  Posted 18 Oct 2017 9:45 am    
Reply with quote

Don Balding wrote:
Thanks Bob
that helped,had to tighten spring almost to max.
Now string 1 pulls with string 5 but string 9 and 10 dont pull until 1 and 5 reach their limit.
not knowing the C6 neck (yet)just wondering how often would string 1, 5,9 and 10 be used together.

Strings 5, 9 and 10 are used together as notes of a 9th chord (root on 10). Most people don't raise their 1st string on this pedal, but then again most people today tune their 1st string to D, not G.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website

Don Balding

 

From:
Oklahoma
Post  Posted 18 Oct 2017 10:30 am    
Reply with quote

I DONT BELIEVE IT
i have spent 1 1/2 weeks trying to get this right and a couple hand fulls of hair.
the tricky part was balancing string 1 and 5 since one is raise and one is lower so opposite string tension comes into play.
after almost wearing out the threads from moving rods and pivot points and a closer look i just noticed on the small bellcranks attached to the large bellcrank, the pivot is offcenter.
after reversing, problem solved.
my wife has been telling me i need glasses,oh well.
Many thanks Bob
View user's profile Send private message Send e-mail

Michael Johnstone


From:
Sylmar,Ca. USA
Post  Posted 24 Oct 2017 12:32 pm    
Reply with quote

On that guitar,that pedal with those changes is pretty much always gonna feel like a truck clutch. Ask me how I know.....
Live with it and enjoy the tone.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP