Author |
Topic: ZB C6 pedal 5 |
Don Balding
From: Oklahoma
|
Posted 17 Oct 2017 5:05 pm
|
|
hoping someone has suggestion.
I have a ZB D-11 I bought used long ago to explore the C6 neck.
The C6 pedals had many problems and were not setup to the standard codependent.
with no luck getting the pedal pulls in sync i removed all the rods and started over.
Using some of the pictures of the ZB undercarriage that I found in the Forum I started over.
I got all of the pulls in sync except the 5th pedal.As the pedal is depressed the pull for the 5th string lower pulls but the 3 raises do not begin until the 5th string has hit its limit.I have moved the rods and bell cranks to to every position with no luck.Am i missing something???
|
|
|
|
Bob Hamilton
From: California Central Coast
|
Posted 17 Oct 2017 8:44 pm zB
|
|
Tighten the spring on the 5th string lower. |
|
|
|
Don Balding
From: Oklahoma
|
Posted 18 Oct 2017 7:02 am
|
|
Thanks Bob
that helped,had to tighten spring almost to max.
Now string 1 pulls with string 5 but string 9 and 10 dont pull until 1 and 5 reach their limit.
not knowing the C6 neck (yet)just wondering how often would string 1, 5,9 and 10 be used together. |
|
|
|
Bob Hamilton
From: California Central Coast
|
Posted 18 Oct 2017 9:14 am Zb
|
|
Don, balance the string pairs with the small crossbars, then balance the string groups on the larger crossbar. Don't forget to use the center mounting screw for balancing too. Time consuming for sure, good luck, BH |
|
|
|
b0b
From: Cloverdale, CA, USA
|
Posted 18 Oct 2017 9:45 am
|
|
Don Balding wrote: |
Thanks Bob
that helped,had to tighten spring almost to max.
Now string 1 pulls with string 5 but string 9 and 10 dont pull until 1 and 5 reach their limit.
not knowing the C6 neck (yet)just wondering how often would string 1, 5,9 and 10 be used together. |
Strings 5, 9 and 10 are used together as notes of a 9th chord (root on 10). Most people don't raise their 1st string on this pedal, but then again most people today tune their 1st string to D, not G. _________________ -𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Don Balding
From: Oklahoma
|
Posted 18 Oct 2017 10:30 am
|
|
I DONT BELIEVE IT
i have spent 1 1/2 weeks trying to get this right and a couple hand fulls of hair.
the tricky part was balancing string 1 and 5 since one is raise and one is lower so opposite string tension comes into play.
after almost wearing out the threads from moving rods and pivot points and a closer look i just noticed on the small bellcranks attached to the large bellcrank, the pivot is offcenter.
after reversing, problem solved.
my wife has been telling me i need glasses,oh well.
Many thanks Bob |
|
|
|
Michael Johnstone
From: Sylmar,Ca. USA
|
Posted 24 Oct 2017 12:32 pm
|
|
On that guitar,that pedal with those changes is pretty much always gonna feel like a truck clutch. Ask me how I know.....
Live with it and enjoy the tone. |
|
|
|