| Author |
Topic: Lost tuning wrench msa d10 |
Gordon Borland
From:
San Antonio, Texas, USA
|
Posted 5 Feb 2016 12:51 pm |
|
| What size are the tuning nuts for the knees and pedals on the end of the msa d10. I lost my wrench and can't remember the size. Thanks in advance. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 5 Feb 2016 12:54 pm
|
|
3/16"
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 5 Feb 2016 5:41 pm
|
|
Gordon, the MSA's use a #5 x 3/8" long tuning nut and they are 3/16" hex as Lane stated. But, if you're needing a wrench, you need to get a 5mm socket or tuning wrench as they swell slightly when you thread them on the pull rod. Enough that a 3/16" wrench is sometimes near impossible to get on.
Bobby Bowman informed me of this and told me that I needed to make a 5mm wrench to remedy this issue. So I did. There are a variety of wrench combinations on my website and I just ran 25 5mm singles this afternoon. I still need to bag and tag then get them into inventory.
http://psgparts.com/Wrench-Tuning-Pedal-Steel-Single-5mm-Hex-TL-SI-5mmHEX.htm
Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Gordon Borland
From:
San Antonio, Texas, USA
|
Posted 6 Feb 2016 9:07 pm Thanks
|
|
| Thanks guys! What a forum! |
|
|
|
Jerry Van Hoose
From:
Wears Valley, Tennessee
|
Posted 10 Feb 2016 12:02 pm 5mm Tuning Wrench
|
|
I needed a 5mm tuning wrench for my Mullen guitar. I ordered one a couple of days ago from Michael and it was delivered today, excellent workmanship & perfect fit. 
 |
|
|
|
Brian Coulson
From:
Hawaii, USA
|
|
|
|
