Author |
Topic: ATA Flight Case For Williams U-12 (SOLD) |
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 30 Aug 2017 10:06 am
|
|
I've acquired this very high quality UniTec wheeled flight case that I'm hoping someone can use. It originally came with a Williams U-12 but it may fit others as well as is, or with some modification.
Body compartment: 8 1/2" x 32 3/4"
Leg/pedal rack compartment: 4" x 32 3/4"
Corner support blocks in body compartment and blocks in lid allow for 3 1/4" tall end plates. Total inside height is 7" (including lid).
Outside dimensions: 15" x 9 1/2" x 38"
As you can see it's in close to new condition. The previous owner never took his guitar out of his home.
UniTec web site: http://www.unitecproducts.com/index.html
These cases sell for well over $500.00 new but I'll let it go for $250.00 plus actual FedEx ground shipping to your door.
I can accept PayPal, USPS money order, or your personal check, (if you're not in a hurry). _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
----------------------------------
Last edited by Lynn Stafford on 16 Sep 2017 3:14 pm; edited 1 time in total |
|
|
|
John McClung
From: Olympia WA, USA
|
Posted 30 Aug 2017 1:08 pm
|
|
Lynn, I'll phone you to discuss today Wed, Aug. 30. _________________ E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Bryan Daste
From: Portland, Oregon, USA
|
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 31 Aug 2017 7:32 am
|
|
Bryan Daste wrote: |
If John doesn't take it, I'd like to come try my Emmons S-12 and see if it fits! |
I have not heard from John as of yet. I'm sorry Bryan, but I'm afraid your Emmons S-12 is too long to fit.
As of now, this case is still available. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
John McClung
From: Olympia WA, USA
|
Posted 31 Aug 2017 7:40 am
|
|
Lynn, case is too small for my S12 Zum, never mind, sorry, great deal on that case. _________________ E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Bryan Daste
From: Portland, Oregon, USA
|
Posted 31 Aug 2017 10:19 am
|
|
You're right, of course! I measured the Emmons and it's no go. I bet you know the dimensions of the top of your head...Mr. Push Pull!
Well, if you do happen come across a road/flight case that would fit an S-12 p/p, please give me a shout. Cheers _________________ http://pedalsteelpodcast.wordpress.com |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 5 Sep 2017 7:03 am Bump
|
|
Still available _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Carl Heatley
From: Morehead City,NC
|
Posted 5 Sep 2017 7:15 am
|
|
Hi Lynn,
What's the weight of the case?
Thanks Carl. |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 5 Sep 2017 7:26 am Weight
|
|
Hi Carl,
Thanks for your interest. It weighs about 36 pounds. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 13 Sep 2017 7:20 am Bump
|
|
_________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Gino Cecchetto
From: California, USA
|
Posted 16 Sep 2017 9:35 am
|
|
Lynn;
I have the willie that belongs in that case, so if it is still available, I'll take it. |
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 16 Sep 2017 11:19 am Case
|
|
Hi Gino,
The case is still available, so please consider it yours! I'll send you an email right away... _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|