The Steel Guitar Forum Store 

Post new topic Milkman Half and Half reverb not working.
Goto page 1, 2  Next
Reply to topic
Author Topic:  Milkman Half and Half reverb not working.
Karl Paulsen

 

From:
Chicago
Post  Posted 21 Jun 2017 6:08 pm    
Reply with quote

I've got a Half and Half 1x15 Combo that doesn't seem to have reverb anymore.

Any suggestions on what I should try before contacting the builder?

I seem to remember this happening before and I think I just unplugged and replugged in the reverb tank cord and it came back, but it didn't work this time. I tried turning the reverb all the way up and down in case there was a switch function but nothing there either.

I don't have a footswitch to plug into it to test it that way.

Please help me....
View user's profile Send private message Send e-mail Visit poster's website

Patrick Ickes

 

From:
Upper Lake, CA USA
Post  Posted 21 Jun 2017 6:23 pm     Me too
Reply with quote

I had the same thing happen at my last gig. Wiggled tubes, unplugged/plugged cables, power and stand-by switches on/off. It came back to life, but not a good feeling with an outdoor non-microphone gig. Haven't played through it since.
Patrick
View user's profile Send private message

Ross Shafer


From:
Petaluma, California
Post  Posted 22 Jun 2017 5:43 am    
Reply with quote

Tim stands behind his products and would almost certainly want to know about any probs on his amps when people have them.

Seems to make sense that he'd be the first person to check with. He certainly knows his amps better than any of his customers.

It's probably something simple as reverb probs often are. I bet he'd be happy to help.
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 22 Jun 2017 8:00 am    
Reply with quote

What's with the pig?
View user's profile Send private message Send e-mail

Tim Marcus


From:
San Francisco, CA
Post  Posted 22 Jun 2017 8:25 am    
Reply with quote

...

Last edited by Tim Marcus on 22 Jun 2017 8:53 am; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website

Tim Marcus


From:
San Francisco, CA
Post  Posted 22 Jun 2017 8:52 am    
Reply with quote

99% of the time reverb goes away because of an issue that is external to the amplifier. Since this post is going to live on the forum forever - here is a troubleshooting and parts list for all Milkman amplifiers, and it will double for Fender and just about any tube amplifier with reverb.

The reverb circuit consists of 4 external parts in this order:

Reverb driver. This is typically a 12AT7 preamp tube, and its the middle tube in your Half and Half. You can replace this tube by simply pulling it out and putting a new one in.

https://www.tubesandmore.com/products/12at7-ruby

from there, the signal goes through an RCA cable:

https://www.tubesandmore.com/products/cable-rca-right-angle-plugs

to a spring reverb tank:

https://www.tubesandmore.com/products/reverb-tank-mod-4ab3c1b

and back up into the amp where it meets the recovery tube usually a 12AX7:

https://www.tubesandmore.com/products/12ax7a-c5-ruby-tubes

and thats it. Usually replacing one or all of those small items makes it come back to life.

Some of the older Half and Half amplifiers have a 1/4" TRS to RCA cable. If you want to replace that, you will need to contact me for a replacement because those were custom built. Or if you have soldering chops, you can probably just re-terminate the connectors (where the cable is most vulnerable to failure)

If after replacing all external components your reverb is still not working, you can send the amplifier chassis in for repair. Out of all the repair emails that have come through over the years, that has only been the case 1 time. Most of the time I just send parts or suggest customers replace tubes and thats all it takes.

Changing tubes and reverb tanks is similar to replacing a tire on a car. Its not fun, but its relatively easy and its certainly not worth abandoning your car on the side of the road forever when it happens. Very Happy
_________________
Pedalsteelamp.com
Milkmansound.com
Follow me on Facebook!
Milkman Sound on Twitter
View user's profile Send private message Send e-mail Visit poster's website

Ross Shafer


From:
Petaluma, California
Post  Posted 22 Jun 2017 10:39 am    
Reply with quote

Erv Niehaus wrote:
What's with the pig?


That's my beautiful pet Arva....750 pounds of sweetness. Why my avatar?..she's better looking than I am.
View user's profile Send private message Send e-mail

Karl Paulsen

 

From:
Chicago
Post  Posted 22 Jun 2017 10:56 am    
Reply with quote

Thanks Tim,
I'll work my way through those suggestions as best I can.

Mine is a more recent (about 1.5 years old) and it has a 1/4 jack on the back, but I can't see the reverb tank end without unscrewing the bag it is in.
View user's profile Send private message Send e-mail Visit poster's website

Tim Marcus


From:
San Francisco, CA
Post  Posted 22 Jun 2017 11:13 am    
Reply with quote

yes, you will need to remove the tank from the bag, which is there to dampen and protect it from anything you might store in the amp (cables, power cable, etc)

Regarding the pig, I have met that pig and its friggin enormous!!
_________________
Pedalsteelamp.com
Milkmansound.com
Follow me on Facebook!
Milkman Sound on Twitter
View user's profile Send private message Send e-mail Visit poster's website

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 22 Jun 2017 11:48 am    
Reply with quote

750 pounds!!
I usually ship 'em before they get that big. Whoa!
View user's profile Send private message Send e-mail

Ross Shafer


From:
Petaluma, California
Post  Posted 22 Jun 2017 11:54 am    
Reply with quote

Erv Niehaus wrote:
750 pounds!!
I usually ship 'em before they get that big. Whoa!


Arva's little pals get called for freezer/kitchen duty at about 350lbs. Arva's a keeper though.
View user's profile Send private message Send e-mail

Brooks Montgomery


From:
Idaho, USA
Post  Posted 22 Jun 2017 12:02 pm    
Reply with quote

Ross Shafer wrote:
Erv Niehaus wrote:
750 pounds!!
I usually ship 'em before they get that big. Whoa!


Arva's little pals get called for freezer/kitchen duty at about 350lbs. Arva's a keeper though.


...which reminds me of my favorite Sven & Ooly joke, regarding Sven's three legged pig.
Sven's punchline: "...a pig that smart, you don't eat all at once."
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 22 Jun 2017 12:19 pm    
Reply with quote

Did you hear the one about the three legged chicken?
View user's profile Send private message Send e-mail

Steven Paris

 

From:
Los Angeles
Post  Posted 25 Jun 2017 5:14 pm    
Reply with quote

No
_________________
Emmons & Peavey
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 26 Jun 2017 7:42 am    
Reply with quote

Well, that settles that. Whoa!
View user's profile Send private message Send e-mail

Steven Paris

 

From:
Los Angeles
Post  Posted 26 Jun 2017 3:56 pm    
Reply with quote

Did you hear the one about the three-legged steel player?
_________________
Emmons & Peavey
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Jun 2017 8:16 am    
Reply with quote

Was one shorter than the other two? Whoa!
View user's profile Send private message Send e-mail

Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 27 Jun 2017 9:43 am    
Reply with quote

Lots of helpful information here for Karl. Rolling Eyes
View user's profile Send private message Send e-mail

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Jun 2017 10:06 am    
Reply with quote

We try. Very Happy
View user's profile Send private message Send e-mail

Steven Paris

 

From:
Los Angeles
Post  Posted 27 Jun 2017 3:19 pm    
Reply with quote

Usually. Unless, of course, Susie Loomis shows up.
_________________
Emmons & Peavey
View user's profile Send private message Send e-mail

Peter Harris

 

From:
South Australia, Australia
Post  Posted 28 Jun 2017 3:37 am    
Reply with quote

At least we've determined that a reverb circuit ISN'T a pig to work on..... Rolling Eyes
_________________
If my wife is reading this, I don't have much stuff....really!
View user's profile Send private message Send e-mail

Patrick Ickes

 

From:
Upper Lake, CA USA
Post  Posted 28 Jun 2017 9:10 pm     Not giving up on this great amp
Reply with quote

Tim,
First off, I would like to clarify my previous post last sentence stating 'I haven't used the amp since'.
All I meant to say was I haven't had another gig or set it up in my room to use it again. You're reference to leaving the car due to a flat tire was probably in response to that. Sorry if you took it that way.
Now back on topic.
Thanks for the amp/tube/trouble shooting info. My amp is a 2 channel and has four tubes but only one 12AT7. Can I assume that is the reverb driver, and can I replace it with a 12DW7 to modify/calm down the reverb?
Thanks for your time replying to our questions.
Patrick
View user's profile Send private message

Tim Marcus


From:
San Francisco, CA
Post  Posted 29 Jun 2017 10:23 am    
Reply with quote

if you want less reverb recovery, you need to replace the 12AX7 to the left of the little reverb transformer (facing rear) with a 12DW7

leave the 12AT7 in place as the driver.

The 12DW7 has 2 triodes with different gain factors. The first 3 pins are used for the reverb recovery circuit, and will have the same effect on the return as lowering the reverb mix control. The second triode - is the same as the 12AX7 that is already in place so you do not lose any power. Its a handy substitution to get more attenuation in the reverb circuit.
_________________
Pedalsteelamp.com
Milkmansound.com
Follow me on Facebook!
Milkman Sound on Twitter
View user's profile Send private message Send e-mail Visit poster's website

Karl Paulsen

 

From:
Chicago
Post  Posted 29 Jun 2017 10:38 am    
Reply with quote

An update...

Somehow didn't realize at the time that the reverb stopped working right after the power surge/short/outtage caused by the ATT cable guy who drilled from the inside of my wall right through my electrical riser main (lucky he didn't die I think...) on the outside. Glad I figured this out before fiddling around with it myself. ATT acknowledged their culpability and said they'd fix the riser and any appliances that may have been damaged by the short.

They were over today to inspect the repair that was done last week and it looks like they're going to pay to have my amp repaired!

Anyone have any recommendations for the BEST amp repair in Chicago?
View user's profile Send private message Send e-mail Visit poster's website

Tim Marcus


From:
San Francisco, CA
Post  Posted 29 Jun 2017 11:41 am    
Reply with quote

I have a great dealer in Chicago - Chicago Music Exchange. They do repairs there too. I would trust them over anyone else.
_________________
Pedalsteelamp.com
Milkmansound.com
Follow me on Facebook!
Milkman Sound on Twitter
View user's profile Send private message Send e-mail Visit poster's website


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP