| Author |
Topic: Zum S-10 'universal' on Extended Frame.SOLD |
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 6:02 am |
|
A very interesting tuning on this. Standard E9 10 string but with 6 and 5 giving access to some C6th-style voicings by virtue of the extra pedals. (There is actually a sixth centrally-mounted vertical lever but although it has pull-rods I can't see what it's doing as they're 'wound off'.)
I have to let it go because I can't change the knee-lever functions to suit my set-up without detracting from its universal capabilities.
It has a 'Day' set-up but the 5/10 lower has to be on LKL which is why I can't use the guitar.
The first three pedals are standard 'Day'. Es raise to F on LKR, Bs lowered on LKL, Es lowered on RKL and RKR is standard 2/9 lower.
It's in very nice condition and comes with a Thomas case. $2400.00 and you pay shipping. PayPal if you pay the charges. I'll be driving north in May through FL, GA, TN, KY, IL, MO, IA and into the Dakotas so shipping could perhaps be avoided.
The third picture shows the carbon-twill style mica finish.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
----------------------------------
Last edited by Roger Rettig on 11 Apr 2017 11:24 am; edited 3 times in total |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 6:27 am
|
|
Contact me for the full copedant. To be honest I don't fully understand its potential but I've had fun looking around for stuff.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 11 Apr 2017 6:31 am Photos of underside?
|
|
| Roger, if possible I would like to see some photos of the underside....thanks jack |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 6:47 am
|
|
Several requests for underside pictures so I hope these will work for you.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 6:59 am
|
|
Several inquiries for the copedant so here it is:
P1 - Raises 4 & 5
P2 - Raises 3 & 6
P3 - Raises 5 & 10
(Standard 'Day' pedals)
P4 - Lowers 2 to D, lowers 7 to F
P5 - Raises 4 to F, lowers 8 to D
P6 - Raises 5 to C# and 6 to A# (C6 pedal 7?)
LKL - Lowers 5 & 10
LKR - Raises 4 & 8
RKL - Lowers 4 & 8
RKR - Lowers 2 and 9 (standard changes)
Centrally-mounted:
CKR - Raises 6 to A and 10 to C
CKV - Has 2 rods that seem to be hooked to 1 and 2 but they're not tuned.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Edward LeVasseur
From:
Maine, USA
|
Posted 11 Apr 2017 7:00 am Zum
|
|
The top is nice ,is that carbon fiber?
_________________
Shobud Ldg Shobud Pro 1 Carter Starter,Vegas 400, Nashville 400 Fender Deluxe Reverb Boss DD3 Holy Grail Reverb |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 7:12 am
|
|
Here's a view of the front apron.
Yes, it's a kind of carbon-twill (as I said in my first post).
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 7:16 am
|
|
I'm reliably informed that this is a Zum S-10 on an extended frame, not an SD-10.
Thanks.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Fred Jack
From:
Bastrop, Texas 78602
|
Posted 11 Apr 2017 8:23 am steel
|
|
| Roger, is this a triple raise triple lower? |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 8:24 am
|
|
Triple-raise, double-lower, Fred.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 11 Apr 2017 10:40 am
|
|
The Zum has been sold. Many thanks for all your interest.
Forum donation will be sent when funds are in my bank.
That was quick!
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Richard Alderson
From:
Illinois, USA
|
Posted 15 Apr 2017 5:10 am
|
|
My God - Where did you get that thing? What a guitar! I wonder if the vertical lever hooked up to strings 1 and 2 was to raise them for the unison lick.
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500.
Last edited by Richard Alderson on 15 Apr 2017 6:32 am; edited 2 times in total |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 15 Apr 2017 5:22 am
|
|
I don't know, Richard. That would be a possibility but I never was able to get comfortable playing it because of the E-lowers being RKL and B lowers on LKL. If I had reassigned pulls I think the 'universal' capability would have been compromised and that would be a pity.
So I didn't even get as far as tuning those rods to see what they did.
This fine guitar should reach its new owner today!
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
