INSTRUCTION STRINGS ACCESSORIES MUSIC LINKS
 Visit Our Catalog at SteelGuitarShopper.com for Steel Guitars, Strings, Instruction, Music and Accessories 
Forum Index
where steel players meet online
The Steel Guitar Forum

Post new topic Reso Coverplate Suggestions
Reply to topic
Author Topic:  Reso Coverplate Suggestions
Gary Meixner


From:
New York, USA
Post Posted 15 Feb 2017 5:31 pm     Reply with quote

Does anyone have an opinion on the Golden Gate reso coverplates that Elderly sells? I need to find an affordable spider bridge style coverplate for a guitar I am building.
Any suggestions are welcome. Thank you.

Gary Meixner
View user's profile Send private message Send e-mail
Ron Ellison


From:
D.C.
Post Posted 15 Feb 2017 5:46 pm     Reply with quote

Hey Gary,
I know this isn't about Elderly,
But I was checking out stuff on the 'bay and found this seller who just cleaned out some old music store. He has a bunch of listings, some for old spider reso stuff.
How about a 12 legged spider?
http://www.ebay.com/itm/Vintage-Steel-Resonator-Cover-Plate-3-/172525635365?hash=item282b544725:g:TMAAAOSwTuJYniWq
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post Posted 21 Feb 2017 9:19 am     Reply with quote

I am in the process of reassembling my '81 Dobro Model 60-DS that has been in pieces since '86 (it's a long story). All I have here in Colorado are the body, neck, and screens; the cone, spider, and coverplate are in storage in Minnesota. I am installing a new cone and spider from Beard, so they won't be an issue, but I'm lacking a coverplate. Until I get back to Minnesota this summer to retrieve the original, I plan to install one of the $18.04 Chinese replicas on a temporary basis. It'll take a few weeks for delivery (it's apparently on the slow boat from China). I will report back on my impression of the coverplate once it finally arrives.

If it's "affordable" that you're looking for, it's doubtful you can do much better than $18.04.
View user's profile Send private message Send e-mail
Howard Parker


From:
Clarksburg,MD USA
Post Posted 21 Feb 2017 12:02 pm     Reply with quote

The import cover plate will most likely have a different mounting pattern than what is currently drilled. If so you will have to drill the top for the new pattern.

hp
_________________
Howard Parker

03' Carter D-10
52' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L
View user's profile Send private message Send e-mail Visit poster's website
Robert Allen


From:
Tennessee, USA
Post Posted 21 Feb 2017 5:56 pm     Reply with quote

I've bought a few of these Saga Golden Gate coverplates. They aren't high enough to get above the spider on many reso's. I don't happen to have one in stock at this time so I can't measure it. It might work but be prepared that it may not fit well.
View user's profile Send private message Send e-mail Visit poster's website
Jack Hanson


From:
San Luis Valley, USA
Post Posted 22 Feb 2017 7:08 am     Reply with quote

Howard Parker wrote:
The import cover plate will most likely have a different mounting pattern than what is currently drilled. If so you will have to drill the top for the new pattern.

The diagram for the Chinese cover plate on the web site would suggest that the holes are within a gnat's whisker of those drilled in my 60-DS.

If it won't fit, I'm fully prepared to drill out the body, plug the holes with 1/8" hardwood dowel rod, and redrill as Mr. Beard suggests in his reso setup video. After all, it's an early '80s OMI, not a prewar OM-45.

It could very well be that the imported cover plate is an unusable piece of junk, but for $18.04 delivered to my mailbox (about the cost of renting a case of Coors here in Colorado), I'm willing to take that risk. Can always mount a clock on it and hang it on the wall...
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post Posted 7 Mar 2017 9:29 am     Reply with quote

Jack Hanson wrote:
Howard Parker wrote:
The import cover plate will most likely have a different mounting pattern than what is currently drilled. If so you will have to drill the top for the new pattern.

The diagram for the Chinese cover plate on the web site would suggest that the holes are within a gnat's whisker of those drilled in my 60-DS.

The holes on the eighteen dollar imported cover plate match my 60-DS almost exactly. No plugging and redrilling will be necessary. Since I have yet to obtain and install the new cone, spider, and saddle blank, I can't address the height issue that Mr. Allen mentions above. I will report back after all of the parts are delivered as to whether or not the import plate is tall enough to clear the saddle.
View user's profile Send private message Send e-mail
Gary Meixner


From:
New York, USA
Post Posted 7 Mar 2017 11:51 am     Reply with quote

I ordered a Golden gate coverplate from Elderly ($60.00) for my guitar and can report the following:

Made from nickle plated brass and looks good. It does seem to be a bit flimsy but still sturdy enough for my application. I had to cut the bridge insert down a bit but the tailpiece also lays a little lower so the break angle is adequate. I don't have a another coverplate to compare it to so I don't know how the holes line up with other manufactures.

I have had the cone and spider for a long time and can't remember where they came from but I believe they are both made by Quarterman. I tune the guitar to standard Hawaiian, A Major / low bass. It sounds great but does need a little fine tuning to the set up. I'll post some pics and a recording soon. If I find a really bond with the instrument I may invest in a quality coverplate from Beard. I have a feeling a taller bridge might be an improvement. Still the guitar projects nicely and the tone is perfect for Hawaiian.

Thanks for the input and help.

Gary Meixner
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Steel Guitar Music
Instrumental steel guitar CDs for your permanent collection
www.SteelGuitarMusic.com

Please review our Forum Rules and Policies

The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support This Forum


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron
HTTP