Author |
Topic: What Kind of Sho~Bud is This |
Ian Worley
From: Sacramento, CA
|
Posted 17 Oct 2016 12:40 pm
|
|
Probably has serial number in the mysterious 7000s, no? Why do you say it is laminated pressed board Henry? It just looks like that gray textured paint they used to use on the undercarriage. The top, necks and apron look like maple to me.
Here are the original patent drawings for the Crossover. The changer mount looks the same, but the fingers themselves are functionally more conventional in the patent, albeit with a flat top (the patent wasn't recorded until '72 though).
I am curious if the bridge-lever thingies were a Sho-Bud experiment, or if they were installed later by someone. The scale length would be shorter with the fulcrum of the bridge offset like that (as Tommy alluded to). No one else with an example of this changer style out there in SGF-land?
|
|
|
|
Ian Worley
From: Sacramento, CA
|
Posted 17 Oct 2016 12:55 pm
|
|
Here's one in the for sale section with changer fingers like those in the patent:
|
|
|
|
Henry Matthews
From: Texarkana, Ark USA
|
Posted 18 Oct 2016 8:59 am
|
|
Thanks for the neat info Ian, very interesting.
As far as being laminated, I will look closer but just looked like a thin laminate over the board of some type. The changer is an interesting design and I can see why the scale would be shorter, will have to check that out.
I'll look it over real good tonight for serial number and see if it is laminated or not.
Thanks again, Ian. _________________ Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
John Billings
From: Ohio, USA
|
Posted 18 Oct 2016 11:43 am
|
|
It's not laminated. The paint on the underside is called Roxatone. It's still made in Canada. Very durable, and was popular in the Fifties for industrial stuff, kitchens, and anything that needed a strong finish. The guitar is a very early Crossover, pre Baldwin or Gretsch connections. The Patent drawings are for a later model. _________________ Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps |
|
|
|
Dennis Wireman
From: North West Indiana 47978
|
Posted 10 Nov 2016 9:56 am baldwin
|
|
64
|
|
|
|
Rick Abbott
From: Indiana, USA
|
Posted 10 Nov 2016 2:52 pm
|
|
Yeah, that changer is very similar to the one on my Bud. Mine was built in the fall of 1966. Mine is 23" scale. My guess is they tried 23" to get away from string breakage. But why the rollers? On mine, the string is 24" at the changer axle and 23" at the roller axle.
_________________ RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Wakarusa 5e3 clone
1953 Stromberg-Carlson AU-35 |
|
|
|