Author |
Topic: Recording direct with Steelaire? |
Paul Stauskas
From: DFW, TX
|
Posted 7 Dec 2015 1:28 pm
|
|
I was wondering if anyone is recording using the direct out on the Steelaire? I have had decent results just mic'ing a cab and running the microphone into my Roland Quadcapture with Ableton as the DAW. I tried using the direct out of the Steelaire with an XLR out/instrument plug into the Quadcapture but could not get a signal? Any advice or sound clips of your setup would be appreciated! _________________ My site |
|
|
|
Paul Stauskas
From: DFW, TX
|
Posted 8 Dec 2015 2:28 am
|
|
I changed out a cord and was able to get a signal this time. Here's a sample of what I'm getting (please excuse the playing!)
Emmons push pull -> Hilton pedal -> Steelaire -> Direct out -> Roland Quad capture -> Ableton.
No effects, just the amp's reverb.
https://soundcloud.com/vestapaul/judy-recording-test
Any advice or comments is/are appreciated! _________________ My site |
|
|
|
mtulbert
From: Plano, Texas 75023
|
Posted 8 Dec 2015 4:15 am
|
|
Paul,
It sounds good to me, but I would try it with a track to make sure that the steel will cut through. With a track you may want to had a little more high end to it.
Happy Holidays _________________ Mark T
Rittenberry Laquer D10, Rittenberry Prestige SD10, Revelation Preamp,Revelation Octal Preamp,Lexicon PCM 92 Reverb, Furlong Cabinet |
|
|
|
John McClung
From: Olympia WA, USA
|
Posted 9 Dec 2015 3:21 am
|
|
Paul, when did you get a push-pull? Don't recall seeing one in lessons with you, but then I seem to have a mind like a steel...sieve! Good tone and playing on that test track, Mooney would be proud of you. _________________ E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Paul Stauskas
From: DFW, TX
|
Posted 9 Dec 2015 10:30 am
|
|
Thanks Mark and John for your comments. John, the push pull is a recent acquisition. The sound is so nice, hopefully I can get it set up properly soon. _________________ My site |
|
|
|
John Sluszny
From: Brussels, Belgium
|
Posted 9 Dec 2015 11:18 am
|
|
Sounds good,good tone,but I hear a hum ! |
|
|
|
Dale Rottacker
From: Walla Walla Washington, USA
|
|
|
|