The Steel Guitar Forum Store 

Post new topic I was wrong about ribbons !
Reply to topic
Author Topic:  I was wrong about ribbons !
Bob Hoffnar


From:
Austin, Tx
Post  Posted 29 Nov 2015 9:58 am    
Reply with quote

http://steelguitarforum.com/Forum11/HTML/005133.html

I recently had a chance to A/B my favorite mic for steel ( U47 FET from Lawson) with a Royer 121 ribbon and I am now a ribbon convert.
That mic sounds amazing ! Clear and articulate with a really nice full yet open sounding midrange. I still love my 47FET but the Royer has a thing and it is nice.
My prejudice about ribbons was unfounded.
I am using a Neve portico 5012 for a pre amp. Super sweet combination.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website

John Macy

 

From:
Rockport TX/Denver CO
Post  Posted 29 Nov 2015 5:36 pm    
Reply with quote

If you look at buying one, you should check out the Shiny Box ribbons--I have put one of the them and a 121 side by side on faders and have guitar players choose their favorite and it's the Shiny Box about 80% of the time (and half the price!)
_________________
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
View user's profile Send private message Send e-mail Visit poster's website

Bob Hoffnar


From:
Austin, Tx
Post  Posted 1 Dec 2015 5:47 am    
Reply with quote

I already bought a Royer. It's pretty awesome.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website

John Macy

 

From:
Rockport TX/Denver CO
Post  Posted 1 Dec 2015 2:32 pm    
Reply with quote

Can't go wrong with that! I use them too all the time
_________________
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
View user's profile Send private message Send e-mail Visit poster's website

Mike Neer


From:
NJ
Post  Posted 3 Dec 2015 4:57 pm    
Reply with quote

John, could it be extended high end that the Shiny Box has that makes it tantalizing for guitarists? What about the 101, do you have one of those? The high frequencies are a little more present than in the 121.
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

Rick Schacter

 

From:
Portland, Or.
Post  Posted 5 Dec 2015 8:21 am    
Reply with quote

Cascade Fatheads work pretty good for guitar too.
I put a Shure 57 about 1" away from the grill at a little bit of an angle.
Then I place the Fathead about a foot away from the grill.

I haven't tried this with steel guitar yet.
View user's profile Send private message Send e-mail

Mark van Allen


From:
Watkinsville, Ga. USA
Post  Posted 5 Dec 2015 8:37 am    
Reply with quote

I ended up preferring the Fatheads I have to the Shinybox, but they're all great bang-for-buck. I would like to try some of the active ribbons that are out now.
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com
View user's profile Send private message Send e-mail Visit poster's website

John Macy

 

From:
Rockport TX/Denver CO
Post  Posted 5 Dec 2015 12:44 pm    
Reply with quote

What trannies are in the Fatheads? I have the lastest ribbon motors from SB and Cinemag trannies...

Have not tried the 101, just have the 121. Also have an AEA R84 I like a lot. I also took in a couple of active Samsons on a trade a while back, but have not spent a lot of time with them...
_________________
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
View user's profile Send private message Send e-mail Visit poster's website

Les Cargill

 

From:
Oklahoma City, Ok, USA
Post  Posted 5 Dec 2015 12:50 pm    
Reply with quote

Anybody looked at the Cloudlifter for use with dynamics/ribbons? Looks interesting.
View user's profile Send private message Send e-mail

Rick Schacter

 

From:
Portland, Or.
Post  Posted 7 Dec 2015 8:53 pm    
Reply with quote

Les Cargill wrote:
Anybody looked at the Cloudlifter for use with dynamics/ribbons? Looks interesting.


Yes! I bough it from Cascade Microphones.
It does a great job of boosting the signal for my Fathead mic.
I also use it with my RE-20.

All I could find on their web site is package deals which include the Cloud Lifter.
They sold them separately when I bought mine:

http://www.cascademicrophones.com/cascade_package-deals.html
View user's profile Send private message Send e-mail

David Winfrey

 

From:
Oklahoma, USA
Post  Posted 13 Feb 2016 11:47 pm     Ribbon Mics
Reply with quote

The Royer R-121s have their reputations for a reason. A lot of people don't realize that they have a figure 8 pickup pattern and the front and back sides sound different. I think the back side is a little warmer.
They also sound fabulous for drums and in front of horns.
If anyone is interested, I have a R-121 for sale (due to financial reasons) in the orginal box, wooden case and all case candy for a resonable price.
Wish I could keep it... such a sweet mic!
You made a good choice... Royers are fantasic!! Enjoy )
David
_________________
Equipment list in a constant state of flux
View user's profile Send private message Send e-mail

Mike Neer


From:
NJ
Post  Posted 24 Feb 2016 11:19 am    
Reply with quote

I picked up a used Royer-121 and an AKG C-414 XLS from the same individual for a crazy price. I was originally interested in comparing both, since I've always liked the way the 414 sounded on tube guitar amps.

My observation at this time is that, while I haven't fallen in love with either of the mics individually, combined they sound fantastic!
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

Bob Hoffnar


From:
Austin, Tx
Post  Posted 25 Feb 2016 6:00 am    
Reply with quote

Mike, you have 2 of the what could be concidered the most essential mics in any recording studio. Both are amazing !

If you have a good cardioid mic you can put the 414 on omni and try out mid side mic recording. Very cool thing to check out.

The Royer 121 is taking me some time to get to know. So far I use it every chance I get because the basic sound is so clear, detailed and uniquely rich. It seems like there is so much there though when it comes to placement. The room and floor seem to mean more to the sound than other mics.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website

Ken Lang


From:
Simi Valley, Ca
Post  Posted 25 Feb 2016 5:40 pm    
Reply with quote

We did some work for Royer a few years ago. Made the equipment that put the crinkle in the ribbons. Do you suppose I could get a deal on a mike? No way.
Anyway, the guy from Royer said the mikes were for orchestras and bands and not for vocals, so I didn't press it.
_________________
heavily medicated for your safety
View user's profile Send private message Send e-mail

Mike Neer


From:
NJ
Post  Posted 2 Mar 2016 6:07 am    
Reply with quote

Bob Hoffnar wrote:

If you have a good cardioid mic you can put the 414 on omni and try out mid side mic recording. Very cool thing to check out.


Bob, that is a great technique that I've been playing around with. The best way to get a BIG sound. I'm using the 414 with an SM57, but I have a few AKG cardioid mics that I'll have to dig out and play with.

My Royer needs a new ribbon, unfortunately.
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

werner althaus


From:
lincoln, NE
Post  Posted 7 Apr 2016 7:36 pm    
Reply with quote

You want to put the 414 to figure 8, not Omni to use with a cardioid for MS recording. Or just use the Royer which is a figure eight, but Cardioid and Omni doesn't make MidSide, it makes something but for true MS you need a figure eight as Side mic. Also don't forget to decode properly, mid mic centered and the Side mic (figure eight) split to 2 channels, panned hard left and hard right with the one on the right phase reversed. All super easy to do ITB (in the box/ computer)

Edit: forgot to mention that you need to point the S mic sideways with the front facing left (from the mics POV). The cool thing about MS is that you can control the image width AFTER you recorded the audio.
Another cool technique to try with figure 8 ribbons (or any figure 8 mics) is Bluemlein stereo, two figure 8 mics, 90 degrees to each other and 45 degrees off axis of the source. Very good spacial representation and full mono compatibility, just like MS.


Last edited by werner althaus on 8 Apr 2016 6:43 am; edited 2 times in total
View user's profile Send private message

Mark Wayne


From:
Wisconsin, USA
Post  Posted 7 Apr 2016 10:55 pm    
Reply with quote

Has anybody A B'd the 121's with the 122v's? Are the 122v's worth that extra $ when it comes to the tone?
_________________
Mark Wayne Krutke
****markwayne.biz****
View user's profile Send private message Send e-mail Visit poster's website

Bob Hoffnar


From:
Austin, Tx
Post  Posted 10 Apr 2016 8:41 pm    
Reply with quote

Werner, you are right about the figure eight. Thanks for the correction. I do use the Royer and 414 on figure 8.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website

Mike Neer


From:
NJ
Post  Posted 12 Apr 2016 6:10 am    
Reply with quote

Bob, what kind of distance are you putting between the mic and speaker, and where do you like the Royer facing?
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

Bob Hoffnar


From:
Austin, Tx
Post  Posted 12 Apr 2016 6:19 am    
Reply with quote

[/img]
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website

Mike Neer


From:
NJ
Post  Posted 18 May 2016 7:46 am    
Reply with quote

I am now hooked on the old "bird cage" ribbon mics from Western Electric and Altec. All the steel parts on my record were recorded with them and they sound wonderful. Don't think I can afford one of my own, though!
_________________
http://www.steelinstruction.com/
http://mikeneer.com
View user's profile Send private message Send e-mail Visit poster's website

Ian Rae


From:
Redditch, England
Post  Posted 13 Jul 2016 2:24 pm    
Reply with quote

Ribbon mics were the first high-quality mics in the early days of radio, when dynamics were poor and condensers were yet to appear. They have a naturally clean transient response. When I worked for the BBC we had a bunch of pre-war ones that I liked to use on the trumpets in a big band. I had access to all the Neumann and AKG types; they were fine for the trombones and saxes, but the ribbons really caught that sawtooth wave!

Also I got a really expensive French horn sound by putting one near the floor beside the player's chair, the figure eight looking up at the rim of the bell and down at the boards. A touch of reverb and you're in Symphony Hall! And great separation, because the waist of the pickup pattern points all round the studio.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

Godfrey Arthur

 

From:
3rd Rock
Post  Posted 12 Oct 2016 8:02 am    
Reply with quote

Les Cargill wrote:
Anybody looked at the Cloudlifter for use with dynamics/ribbons? Looks interesting.


There are other similar units.There are inline units made by another company. Some mics like the Shure SM7 need this booster not unless you have a preamp that supplies 60db of gain. In fact the SM7 can be seen on ebay being sold together with the Cloudlifter.

The SM7 is a go-to mic used not only as a DJ mic for radio broadcast but in rock and rap genres it is a favorite.

In fact Shure endorses the Cloudlifter for use with the SM7.

A ribbon would benefit from these boosters.

Triton Audio makes the Fethead



_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
View user's profile Send private message

Paul Sutherland

 

From:
Placerville, California
Post  Posted 28 Oct 2016 8:32 am    
Reply with quote

I got to record yesterday at a local studio and the engineer put a Royer R-122 on my Twin (set with no reverb), ran that into a Telefunken V72 tube preamp, and then used an actual plate reverb (3' by 6') on the signal. The steel sure sounded good. I'm hopeful for the final mix.

He placed the mic much closer to the speaker than Bob's picture shows.



_________________
It don't mean a thing if it ain't got that swing.
View user's profile Send private message Send e-mail

Godfrey Arthur

 

From:
3rd Rock
Post  Posted 29 Oct 2016 5:58 am    
Reply with quote

Quote:
I got to record yesterday at a local studio and the engineer put a Royer R-122 on my Twin (set with no reverb), ran that into a Telefunken V72 tube preamp, and then used an actual plate reverb (3' by 6') on the signal. The steel sure sounded good. I'm hopeful for the final mix.


The V72 with its tubes helped out a lot I surmise.
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
View user's profile Send private message


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP