| Author |
Topic: GFI replacement levers |
Stuart Docherty
From:
Queensland, Australia
|
Posted 26 Aug 2015 1:59 am |
|
Anybody replaced knee levers on a GFI…?
I have had a GFI Expo for a few months now, long enough to know that i really, really, really, really, really don't like the way the LKL digs into my leg and I would sell my dog to replace it with a lever that maybe bends away a little at the end…
Is this possible…? |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Aug 2015 2:37 am
|
|
A flag might help distribute the pressure.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Stuart Docherty
From:
Queensland, Australia
|
Posted 26 Aug 2015 3:08 am
|
|
| sure… can I ask, what a "flag" is..? |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Aug 2015 3:22 am
|
|
Flags are bits of (usually) metal to enlarge contact area of the lever.
Emmons flag:
MSA flag:
Zum flag:
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Aug 2015 3:23 am
|
|
Other people have improvised their own flags, some look snazzy, some are spatula blades and duct tape.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 26 Aug 2015 9:27 am Re: GFI replacement levers
|
|
| Stuart Docherty wrote: |
Anybody replaced knee levers on a GFI…?
I would sell my dog to replace it with a lever that maybe bends away a little at the end…
Is this possible…? |
what kind of dog? |
|
|
|
Quentin Hickey
From:
Nova Scotia, Canada
|
Posted 26 Aug 2015 9:35 am
|
|
 |
|
|
|
Quentin Hickey
From:
Nova Scotia, Canada
|
Posted 26 Aug 2015 9:40 am
|
|
| GFI should be able to sell you a knee lever flag for your lkl. You tried changing the angle on the lever have you? I find it is more comfortable facing inwards. |
|
|
|
Jack Wilson
From:
Marshfield, MO
|
Posted 26 Aug 2015 7:26 pm GFI flag
|
|
You can buy a knee lever flag from Bob at GFI. The flag is standard on one knee lever of a D-10. Slides on your knee lever and is held by two set screws.
gfimusicalproducts.com |
|
|
|
Stuart Docherty
From:
Queensland, Australia
|
Posted 26 Aug 2015 11:40 pm
|
|
| Quentin Hickey wrote: |
| GFI should be able to sell you a knee lever flag for your lkl. You tried changing the angle on the lever have you? I find it is more comfortable facing inwards. |
yep, i think "inwards" accentuates the problem… it's a good position, but it all comes down to the length and the bonyness of the outside of my knees... |
|
|
|
Stuart Docherty
From:
Queensland, Australia
|
Posted 26 Aug 2015 11:42 pm Re: GFI flag
|
|
| Jack Wilson wrote: |
You can buy a knee lever flag from Bob at GFI. The flag is standard on one knee lever of a D-10. Slides on your knee lever and is held by two set screws.
gfimusicalproducts.com |
Wow… thanks…
I ended up emailing a copy of my post to GFI, they never mentioned they had flags in their reply… (was great they replied..)
I think a flag would do it for me..
Sounds pretty straight forward… |
|
|
|
Stuart Docherty
From:
Queensland, Australia
|
Posted 26 Aug 2015 11:44 pm
|
|
| Lane Gray wrote: |
Flags are bits of (usually) metal to enlarge contact area of the lever.
Emmons flag:
MSA flag:
Zum flag:
|
Looks like a solution to me, thanks... |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 27 Aug 2015 8:16 am
|
|
On my Zum, the end of the LKL lever hit me right at the knee cap and after a while I would experience some discomfort. I contact Bruce and he sent me a flag for that lever and when I installed it I extended it a ways past the end of the lever itself and that took care of the problem.
It fact, that felt so good I went ahead and did the same to my LKR. On this lever, I obtained some 3/23" thick aluminum and fashioned the flag myself.  |
|
|
|
Paddy Long
From:
Christchurch, New Zealand
|
Posted 27 Aug 2015 8:49 pm
|
|
I have several flags on my Zum's ...
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases. |
|
|
|
