| Author |
Topic: New Hudson 3/8 string spacing 10 string Pedal Steel Guitar |
Jimmie Hudson
From:
North Carolina, USA
|
Posted 30 Mar 2015 10:26 pm |
|
The New Hudson 10 string pedal steel with 3/8 inch Wide string spacing is available now built to order.
This is the string spacing used on many Lap steels, Dobros, 6 & 8 String console and pedal steel guitars.
The Guitar comes standard with 3 floor pedals and 4 Knee levers and the standard E9th setup, Maple Body Real hardWood with natural clear coat finish.
George L Eon pickup & Pull Release Changer.
The Guitar has all cross shafts mounted in Ball Bearings on the undercarriage. Each pedal and knee lever has adjustable travel stops. The pedals and knees are smooth and very quite. The setup on the pedals works well even if you play bare foot, easy operating soft touch pedals. They can be set to be stiff if you like the pedals to be hard to push.
This is a very quite operating guitar, Would work well in studio recording environment.
This is a starter to intermediate level steel guitar.
Built to order. Guitar Base Price is $995.00 plus shipping Case sold separately. Call 704-986-6481 8AM-9PM EST to order yours.
 |
|
|
|
Richard Wilhelm
From:
Ventura County, California
|
Posted 31 Mar 2015 1:17 am
|
|
Very nice.
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx
Fender 400, Fender FM212, G&L ASAT.
Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you. |
|
|
|
Bob Vantine
From:
Freeville, New York, USA
|
Posted 31 Mar 2015 9:18 am
|
|
very nice looking ! ...... what about the weight ?
_________________
EQUIPMENT:
"TEAK" ZUM STAGE-ONE Steel / C6th Lapsteel
Peavey NV112 , CLASSIC and EFX112 amps
Peavey Guitars |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 31 Mar 2015 11:47 am weight
|
|
| Bob Vantine wrote: |
| very nice looking ! ...... what about the weight ? |
The standard weight is 18 Lbs. And can be as low as 15 if special ordered to be extra lite. |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 31 Mar 2015 1:29 pm
|
|
I can see this being a great way for lap steel players to upgrade to pedal steel, and with the string spacing, they could adapt their grips faster.
Nice guitar to look at, and seems to looks well built. I would like to see more detailed pictures, and hear sound files...
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 31 Mar 2015 1:50 pm photos
|
|
| Scott Duckworth wrote: |
I can see this being a great way for lap steel players to upgrade to pedal steel, and with the string spacing, they could adapt their grips faster.
Nice guitar to look at, and seems to looks well built. I would like to see more detailed pictures, and hear sound files... |
I have not figured out how to get the sound files uploaded yet. I will post sound track when I get it figured out.
 |
|
|
|
Bob Vantine
From:
Freeville, New York, USA
|
Posted 31 Mar 2015 11:36 pm
|
|
THANKS !
_________________
EQUIPMENT:
"TEAK" ZUM STAGE-ONE Steel / C6th Lapsteel
Peavey NV112 , CLASSIC and EFX112 amps
Peavey Guitars |
|
|
|
Roger Shackelton
From:
MINNESOTA (deceased)
|
Posted 1 Apr 2015 9:17 pm
|
|
Hi Jimmie,
Will your guitar handle the C- 6 tuning?
Roger |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 2 Apr 2015 5:03 am tuning
|
|
[quote="Roger Shackelton"]Hi Jimmie,
Will your guitar handle the C- 6 tuning?
Roger[/quote yes it will.
All guitars are built to order so I can set it up the way you want it. |
|
|
|
Charlie McDonald
From:
out of the blue
|
Posted 14 Apr 2015 2:01 am
|
|
Mr. Hudson, is the changer double raise, double lower, capable of raise and lower on each string,
and fully changeable?
Nice looking instrument.
_________________
Those that say don't know; those that know don't say.--Buddy Emmons |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 14 Apr 2015 3:35 am changer
|
|
| Charlie McDonald wrote: |
Mr. Hudson, is the changer double raise, double lower, capable of raise and lower on each string,
and fully changeable?
Nice looking instrument. |
The changer is a pull release single finger changer.
The undercarriage is set at the factory per order.
I can set up 2 raise and 1 lower on any string with this changer.
Also Can do 1 raise and 2 lowers on any 1 string as well.
The changer can be setup to do many complex changes, but it is best with this style changer, to just keep it simple. The E9th and C6th standard setups work well with this changer. If you need a lot of changeability, I would say go with an all pull changer. I offer the all pull style changer, as well as an undercarriage that can be changed in most anyway you like in the pro model guitar. The pro models start at $1895.00 custom built to order. |
|
|
|
Charlie McDonald
From:
out of the blue
|
Posted 14 Apr 2015 4:33 am
|
|
Thank you for your answers.
I have heard good things about the sound of pull/release guitars; my only experience was with a Red Baron,
so I need say no more.
I wonder if pull/release can accommodate splits, for example, A pedal + Bb lever to split at C (or F# lever + pedal B to get G)?
Thanks.
_________________
Those that say don't know; those that know don't say.--Buddy Emmons |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 14 Apr 2015 4:46 am simple
|
|
| Charlie McDonald wrote: |
Thank you for your answers.
I have heard good things about the sound of pull/release guitars; my only experience was with a Red Baron,
so I need say no more.
I wonder if pull/release can accommodate splits, for example, A pedal + Bb lever to split at C (or F# lever + pedal B to get G)?
Thanks. |
I can set it up to do most anything you want it to.
The only change I have found I can't make it do is change a Mother In Law's mind. LOL
I don't think an all pull changer will do that either.
It is best to keep it simple with the single finger style changer. |
|
|
|
Charlie McDonald
From:
out of the blue
|
Posted 14 Apr 2015 5:20 am
|
|
All right, thanks. I follow what you're saying about the single finger changer. Will certainly consider this.
_________________
Those that say don't know; those that know don't say.--Buddy Emmons |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 14 Apr 2015 6:11 am
|
|
| Very cool all maple pull release steel that has to sound great with maple cabinet. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 14 Apr 2015 6:20 pm sound
|
|
| Johnie King wrote: |
| Very cool all maple pull release steel that has to sound great with maple cabinet. |
Thanks Johnie, I have found that the Maple wood makes the best sounding guitar. The Pull Release changer too me has always been the king of great tone.
A good pickup helps too. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 18 Apr 2015 3:05 pm ttt
|
|
| ttt |
|
|
|
Stephen Williams
From:
from Wales now in Berkeley,Ca, USA
|
Posted 20 Apr 2015 8:29 pm
|
|
Very cool
Are those rectangular cross shafts? Solid?
Also the nut has guitar string ball ends? that's what i have |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 21 Apr 2015 4:31 am cross shaft
|
|
| Stephen Williams wrote: |
Very cool
Are those rectangular cross shafts? Solid?
Also the nut has guitar string ball ends? that's what i have |
The cross shafts are 3/8 aluminum rod.
The rollers are brass Ball ends. |
|
|
|
Daniel McCombe
From:
Pennsylvania, USA
|
|
|
|
