| Author |
Topic: Need Emmons single coil pickup repaired. Who can do it? |
Tommy Everette
From:
Whitakers, NC
|
Posted 28 Apr 2015 6:39 pm |
|
I've got a Emmons single coil pickup with a cracked baseplate.
The crack runs the length of the pole pieces.
Who can replace the baseplate?
 |
|
|
|
Bob Carlucci
From:
Candor, New York, USA
|
Posted 28 Apr 2015 7:55 pm
|
|
http://www.rewindpickup.com/
Tom Brantley does any type of repairs on any type pickups..
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 28 Apr 2015 10:31 pm
|
|
Jerry Wallace, the guy who does Truetone pickups, might be able to. Give him a call
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Hal Braun
From:
Eustis, Florida, USA
|
Posted 29 Apr 2015 4:45 am
|
|
Jason Lollar is a pro.. Pickups are his only business. He rewound a horseshoe pickup for my Dad.. and redid a pickup for me that had the same broken plate issue yours has..
http://www.lollarguitars.com/mm5/merchant.mvc |
|
|
|
Tom Quinn
|
Posted 29 Apr 2015 6:33 am
|
|
Best and with the best components is Jeff at Sheptone pickups. Guy does terrific work and makes the best PAFs on the planet...
http://www.sheptone.com/
_________________
I need an Emmons!
Last edited by Tom Quinn on 29 Apr 2015 11:27 am; edited 1 time in total |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 29 Apr 2015 7:03 am Emmons Pickup Repair
|
|
Tommy,
Besides the capable folks that have been mentioned, another option would be to just send it to Ron Lashley Jr. at Emmons Guitar. He can repair it like new again for you. I've had him repair or rewind several Emmons pickups previously. There is a very good chance that it will need to be rewound, so you could specify what you'd like to have it wound to, if required. Otherwise, he'd probably wind it to about 19.5K ohms.
Emmons Guitar Company by Lashley, INC
PO Box 2044
Burlington, NC 27216
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 29 Apr 2015 7:57 am
|
|
Might wanna do that through a dealer. Of which Lynn is one.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jack Strayhorn
From:
Winston-Salem, NC
|
Posted 29 Apr 2015 4:50 pm
|
|
| Harold Saunders worked for me at Emmons making our pickups. He makes, repairs, and rewinds pickups at his home shop. I strongly endorse his work. His number is 336-672-1386. |
|
|
|
Tim Bridges
From:
Hoover, Alabama, USA
|
Posted 29 Apr 2015 5:40 pm
|
|
| Harold Saunders just reworked my Emmons single coil. Bad pole magnet, new base plate and rewound at a bargain. Man of very high integrity and stands behind his work. |
|
|
|
Tommy Everette
From:
Whitakers, NC
|
Posted 29 Apr 2015 6:13 pm
|
|
Thanks for the info guys.
Always helpful. |
|
|
|
Jack Strayhorn
From:
Winston-Salem, NC
|
Posted 29 Apr 2015 6:26 pm
|
|
| Harold's work is 100% Emmons/Ron Lashley Sr specs. |
|
|
|
