| Author |
Topic: Sho-Bud ID and Advice |
Jim Harrison
From:
Rochester, New York
|
Posted 25 Apr 2015 12:37 pm |
|
| I have a Sho-Bud on loan for a wedding gig in June. It's an S-10 with 6 floor pedals and 3 knees. It has the gumby headstock and aluminum neck. Any help is appreciated, especially with tuning. Thanks! Jim |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 25 Apr 2015 1:04 pm
|
|
That's either a VERY broad question, or you're leaving a lot of stuff out.
If you mean "I have this guitar and I have free rein to set it up my way, what would you do?" I'd use standard E9th tuning (BDEF#G#BEG#D#F#) and I would have
P1 raising 4 and 8 to F
P2 = A pedal (5 and 10 to C#)
P3 = B pedal (3 and 6 to A)
P4 = C pedal (4 and 5 up a whole tone)
P5 unsure
P6 raise 1&2 to G# and E, respectively.
Whichever leg only has one lever, that lowers 4&8 to D#
The other leg, one lowers 6 to F# and raises 1 to G, and the other lowers 2 and 9 to C#
If you had another question in mind, it wasn't clear to me.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jim Harrison
From:
Rochester, New York
|
Posted 26 Apr 2015 6:46 am S-10 Sho-Bud, 6140?
|
|
| Thanks Lane. What I should have asked is how was the guitar originally set up from the factory and how was it intended to function. Jim |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Apr 2015 7:12 am
|
|
Is it the single/single (either rack and barrel or two-hole pullers), or some later version?
Given that they're not terribly high-dollar collectibles, original setup is less relevant than utility to the player (and if it's single-single, change is amazingly easy).
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 26 Apr 2015 9:33 am
|
|
If it is on "loan", you probably shouldn't mess with it without the owner's permission. I wouldn't want anyone messing with my guitar if I loaned it to them.
How it left the factory is a good question. My best guess would be, the first 3 pedals are the basic A,B,C pedals. I would think that levers were the E's to F, E's to D#, and the 2nd string lower to D, and possibly to C# with a half stop. The last 3 pedals, ????
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 26 Apr 2015 9:43 am
|
|
If I could set it up the way I wanted, I would probably go:
| Tab: |
1 2 3 4 5 6 K1 K2 K3
F#...G#
D#...E................................D/C#
G#...........A
E................F#.........F....D#
B.......C#.......C#
G#...........A..........(F#)
F#
E...........................F....D#
D
B.......C#
|
The F# on P6 would be played with your right foot, as long as you can also play the E to D# lever with it.
Actually, if I could change it, I would put G# to F# on string 6 and 1 to G# and 2 to E on a lever and not have the 2nd string changes, or maybe the 2nd string to D on pedal 6. That is only my preference though.
P5 - ??????????
I think if it is only 1 gig, I would just leave it as is.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 26 Apr 2015 10:37 am Re: Sho-Bud ID and Advice
|
|
| Jim Harrison wrote: |
| ...It's an S-10 with 6 floor pedals and 3 knees. It has the gumby headstock and aluminum neck... |
.
That's an odd combination, don't believe Sho~Bud ever made a production S-10 with an aluminum neck, but they made oddball customs so who knows. Is it actually an SD-10, perhaps a converted Pro III? You should post some pictures, it's always interesting to see what people have done with these things. |
|
|
|
Jim Harrison
From:
Rochester, New York
|
Posted 26 Apr 2015 2:13 pm Loaner Sho-Bud
|
|
The guitar is on loan from a gentleman that recently inherited it. He doesnt play and our arrangement is that I will give him a few lessons in trade. I'm also buying him a case to replace the non-original poorly fitting case it's in now. He doesnt know about that.
I plan to use it as is, I was just curious about factory set up. I only need it to cover the Clarence White parts on 'You Ain't Going Nowhere'. So one song at the wedding gig and I'm good.
Here's some pictures as requested. Thanks for all of the input guys!
Best,
Jim H
 |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 26 Apr 2015 2:43 pm
|
|
| It's an old 6140. That's not a Pro III neck though, they are a one piece job that wraps around the changer. This just looks like an aluminum version of the standard wood neck. Anyone know if Sho~Bud made custom aluminum necks before the Pro III? Perhaps it is homemade. If you're interested, you can estimate the manufacturing date from the serial number here: http://www.donblood.net/sho-bud-serial-numbers-and-build-dates.html |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Apr 2015 3:27 pm
|
|
I cannot understand raising 9.
Were I going to play it, I still like my idea over Richard's. But I'm me, and I'm a goofball. With 6 pedals and only 3 knees, I'd rather have the E raises on the pedal outside of the A pedal.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Tom Gorr
From:
Three Hills, Alberta
|
Posted 26 Apr 2015 3:34 pm
|
|
With 6 pedals it would become a 10 string uni.
Two or three more levers would be on order.
If it had to be E9 Richard is not far of from what I would choose for a copedant.
More than enough hardware to set up as a very fine C6 machine... and I bet its tone would be awesome for C6. My pro 2 is awesome that way.
Last edited by Tom Gorr on 26 Apr 2015 4:02 pm; edited 1 time in total |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 26 Apr 2015 3:35 pm
|
|
| Quote: |
| I cannot understand raising 9. |
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Apr 2015 4:36 pm
|
|
Look at the rods. I've never raised 9. Do you raise 9?
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Tom Gorr
From:
Three Hills, Alberta
|
Posted 27 Apr 2015 9:49 am
|
|
| I wonder if this isnt already a Uni10 |
|
|
|
John Billings
From:
Ohio, USA
|
Posted 27 Apr 2015 10:37 am
|
|
Very interesting guitar! Round front, wide pedals, and looks like rack and barrel pull rod ends.
_________________
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 27 Apr 2015 10:39 am
|
|
| The 6140 came stock with 6 pedals and one knee. Someone ought to know what the standard factory copedent was. I assume the extra three pedals originally covered E9 pulls that most of us have on knees nowadays. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Apr 2015 12:25 pm
|
|
| Lane Gray wrote: |
| Look at the rods. I've never raised 9. Do you raise 9? |
Now I understand. Nope. Never have raised 9.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Apr 2015 12:35 pm
|
|
| Ian Worley wrote: |
| The 6140 came stock with 6 pedals and one knee. Someone ought to know what the standard factory copedent was. I assume the extra three pedals originally covered E9 pulls that most of us have on knees nowadays. |
But, do we know if the guitar left the facory with one or three levers. If it was made with three, a standard factory setup for a stock guitar (6p,1k) would be irrelevant.
You are probably correct about the extra pedals being some knee lever changes on a 1 knee lever guitar.
Could this have left the factory as a 6&1 with a C6th tuning?
There are so many questions that come up as this appears to not have been a "standard" guitar from the factory, or it was and someone added the extra levers.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 54 years and still counting. |
|
|
|
John Billings
From:
Ohio, USA
|
Posted 27 Apr 2015 12:56 pm
|
|
I had one, a '67. Pedals were more in the middle. Mine had two knees.
_________________
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps |
|
|
|
Don Blood
From:
Illinois, USA
|
Posted 1 May 2015 11:49 pm
|
|
| I have a 72 6140 built by Paul Franklin. It was originally a C6. It had 6 pedals and no knee levers. The 6139 had 3 pedals and 1 knee lever. I got 4 knee levers from John Coop and removed two pedals to make room. |
|
|
|
