Author |
Topic: Looking for a lap steel bar which is easy to slant |
Kristen Bruno
From: Orlando, Florida, USA
|
Posted 22 Jul 2013 5:42 pm
|
|
Lately changing the hand position to slant the bar has been cramping my hands. Looking for a bar which doesn't take much effort to slant.
Would a bar with two angled sides at about 45 degree angles make it easier, since there would be "less finger stretching" to rotate the bar? I think I saw a video of a guy using a bar like this but I can't find it anymore.
(another less practical option would be to put the lap steel on a rotating lazy susan and hold the bar straight and rotate the whole guitar - never-mind)
Thanks
K _________________ "Technology has given us the ability to repeat all the mistakes we have learned from history, but much faster, deadlier and with much greater accuracy" - KAB |
|
|
|
Doug Beaumier
From: Northampton, MA
|
|
|
|
David Matzenik
From: Cairns, on the Coral Sea
|
Posted 22 Jul 2013 6:10 pm
|
|
The only alternative to the bullet bar that I see is the Lazy Susan. Those other bars are just bars with training wheels. The cramps sound like you are gripping the bar too tightly. Tension in your hand could indicate this.
From the straight bar hold with the first finger on top of the bar, you should only need your thumb to push the butt of the bar back under your fingers. Slant achieved. Or conversely, put the thumb in the hollow and flip the butt up-neck to achieve the reverse slant. Like I said there should not be a lot of tension in your hand. _________________ Don't go in the water after lunch. You'll get a cramp and drown. - Mother. |
|
|
|
Kristen Bruno
From: Orlando, Florida, USA
|
Posted 22 Jul 2013 6:44 pm
|
|
Thanks.
My string blocking gets "mediocre" when I do this but I will have to work on it. _________________ "Technology has given us the ability to repeat all the mistakes we have learned from history, but much faster, deadlier and with much greater accuracy" - KAB |
|
|
|
Tony Lombardo
From: Alabama, USA
|
Posted 22 Jul 2013 7:02 pm
|
|
When I started, I was using a Dunlop bar made of steel, and my slants were terrible. Well, I use a Tribotone B Weight Bar now and my slants are still pretty mediocre, but those mediocre slants are much easier to make with the Tribotone.
Tony L. |
|
|
|
Blake Hawkins
From: Florida
|
Posted 23 Jul 2013 5:47 am
|
|
Contact Jim Burden of "Bullet Bars."
He will build you what you need.
I have two of his bars and they are very easy to slant. My oldest has been used for over 6 years and has no scratches nor nicks. Still looks new.
His phone number: 812-366-3356 |
|
|
|
Webb Kline
From: Bloomsburg, PA
|
Posted 23 Jul 2013 12:31 pm
|
|
Try altering your body position slightly. I notice that people who have the hardest times with slants have their bodies positioned too far to the left toward the neck. I made this discovery myself when I first started playing standing up. I needed to keep my body just a little bit closer to the bridge and it made a world of difference in my slanting accuracy. Much more fluid, wrist much less restricted. |
|
|
|
Jay Yuskaitis
From: Massachusetts, USA
|
Posted 23 Jul 2013 1:06 pm
|
|
The easiest way to accomplish the slants is with pedals. I know, I know, pedals are so mechanical sounding. The only other "Key To The Kingdom", not my words, but from Rick Alexander, PRACTICE, PRACTICE, PRACTICE. The only "true secret". Jay Y. |
|
|
|
David Matzenik
From: Cairns, on the Coral Sea
|
Posted 24 Jul 2013 2:50 am
|
|
BROZ-O-PHONICS RULE!
_________________ Don't go in the water after lunch. You'll get a cramp and drown. - Mother. |
|
|
|
CrowBear Schmitt
From: Ariege, - PairO'knees, - France
|
Posted 24 Jul 2013 4:58 am
|
|
Courtesy of the Archives & Doug B among others ...
|
|
|
|
Edward Meisse
From: Santa Rosa, California, USA
|
Posted 24 Jul 2013 11:38 pm
|
|
Broz-O-phonics are quite good. And so are tribotones. But my favorite bar for electric lap steel is the BJS Jerry Byrd model. That makes for the easiest slants both forward and reverse. It also seems to be easier to get accurate split slants with it. _________________ Amor vincit omnia |
|
|
|
Mark Roeder
From: Milwaukee, Wisconsin, USA
|
Posted 31 Jul 2013 8:47 am
|
|
I would echo what Doug and David say, don't get too caught up in what bar to use, it is in that thumb technique. I was struggling with slants, using to much wrist. I was noticed by Chris Kinneson at a steel guitar convention and he gave me that same tip. Now it's no wrist and mostly pushing with the thumb, well worth the cost of the trip.
BTW I do like those Tribo-tone bars too _________________ www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns |
|
|
|
Gary Meixner
From: New York, USA
|
Posted 31 Jul 2013 9:25 am
|
|
I agree with Doug, don't get too caught up on which bar to use. Ultimately the bar shouldn't matter once you have mastered the technique. Learn to relax your hand and let the weight of the bar be supported by the strings. I also have to agree that the Tribo-tone is a great bar to learn slants with. The material they are made from seems to feel a little less slippery to your fingers yet is nice and slick on the strings. I also love the Bullet Bars made by Jim Burden - I use them almost exclusively now. Make sure you warm up a little before trying a new technique. Play for ten minutes or so using techniques you are already comfortable with then try something new for a few minutes. Relax and have fun.
Good luck,
Gary |
|
|
|
Chris Templeton
From: The Green Mountain State
|
|
|
|
Andy Henriksen
From: Michigan, USA
|
Posted 1 Aug 2013 7:48 am
|
|
Chris Templeton wrote: |
The BJS Jerry Byrd bar is the best. Forward and reverse slants. |
I love mine, but I do have to say, when I first got it I was a bit put off by how slippery it was. I kept losing it. also, the recess in the end is very minimal compared to some others, so you can't grab it with your thumb quite as easily.
That all said, I overcame those things in a few practices, and now it's the only bar I use. |
|
|
|
Jean-Sebastien Gauthier
From: Quebec, Canada
|
Posted 1 Aug 2013 8:02 am
|
|
Chris Templeton wrote: |
The BJS Jerry Byrd bar is the best. Forward and reverse slants. |
+1 |
|
|
|