The Steel Guitar Forum Store 

Post new topic Palm levers on a 2X4 lap steel
Goto page 1, 2  Next
Reply to topic
Author Topic:  Palm levers on a 2X4 lap steel
Dave Begalka


From:
Minnesota, USA
Post  Posted 23 Jan 2012 9:37 am    
Reply with quote

I thought some of you experimenters might get a kick out of this setup. After giving up on my '73 Emmons GS10 due to incompatibility with 6'7" height and size 15 feet, I found I still wanted that sound in the country songs my band plays. But, I didn't want to go the expensive store-bought route (Hipshot or Duesenberg). Probably can't get much cheaper than scrap wood, a plywood fingerboard with blue marker lines, and nails for position dots. The rest is made of scrap aluminum and leftover parts.
I took an aluminum door hinge and modified it to work as a bender tailpiece. The B and D strings go through the plate of the hinge and under the curved knuckle so that when you push the levers down the pitches are raised. The other screws limit the travel of the plate so that the B goes up to a C and the D up to an E. It works surprisingly well, stays in tune, and doesn't break strings any more often than a pedal steel. The tuning is G D G B D G low to high.
The worst part is explaining to curious folks at gigs why I'm playing old country on a souped up 2X4.







View user's profile Send private message Send e-mail

Peter Jacobs


From:
Northern Virginia
Post  Posted 23 Jan 2012 10:10 am    
Reply with quote

That is insane! I love it -- great solution to your problem, and you can't beat the DIY aesthetics. I especially like that you left the stamps on the wood next to the bender. So, how's it sound?
_________________
Peter
---------
www.splinterville.com
YouTube: https://www.youtube.com/@splinterville6278/videos
View user's profile Send private message Send e-mail

Tom Pettingill


From:
California, USA (deceased)
Post  Posted 23 Jan 2012 10:19 am    
Reply with quote

Hell of an idea for the bender Dave!
_________________
Some misc pics of my hand crafted steels
Follow me on Facebook here
View user's profile Send private message Send e-mail

Thomas Temple

 

From:
Florida, USA
Post  Posted 23 Jan 2012 10:44 am     Way to go
Reply with quote

Dave, A great big tip of the hat to you for your ingenuity!! Would love to hear it.
View user's profile Send private message Send e-mail

Thomas Temple

 

From:
Florida, USA
Post  Posted 23 Jan 2012 10:45 am     Way to go
Reply with quote

Dave, A great big tip of the hat to you for your ingenuity!! Would love to hear it.
View user's profile Send private message Send e-mail

Dave Begalka


From:
Minnesota, USA
Post  Posted 23 Jan 2012 11:16 am    
Reply with quote

Peter Jacobs wrote:
That is insane! I love it -- great solution to your problem, and you can't beat the DIY aesthetics. I especially like that you left the stamps on the wood next to the bender. So, how's it sound?

Thanks, Peter. I was wishing there was even more of those stamps left on it.
Overall, it sounds quite good. Not quite as much sustain as most of my steels but still ok. The Bill Lawrence pickup is strong and bright--most convincing pedal steel sound is with the coils in parallel.
View user's profile Send private message Send e-mail

Dave Begalka


From:
Minnesota, USA
Post  Posted 23 Jan 2012 1:31 pm     Link to audio demo
Reply with quote

Here is a link to a short audio clip. As you can hear, I'm still crawling my way up the learning curve.


http://soundcloud.com/dbegalka/01-track-1
View user's profile Send private message Send e-mail

Thomas Temple

 

From:
Florida, USA
Post  Posted 23 Jan 2012 7:26 pm    
Reply with quote

You may be crawling up the learning curve, but you have a good grip and I wouldn't doubt home made cleats!!
View user's profile Send private message Send e-mail

HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 23 Jan 2012 8:17 pm    
Reply with quote

I love it all!..... Very Happy
View user's profile Send private message Send e-mail

Bill Garrett

 

From:
California, USA
Post  Posted 23 Jan 2012 9:27 pm     Re: Link to audio demo
Reply with quote

Way cool!!! I'm thinking' roller nut & bridge? Maybe a maple or mohogany deck? Great idea any way you you make it!
Dave Begalka wrote:
Here is a link to a short audio clip. As you can hear, I'm still crawling my way up the learning curve.


http://soundcloud.com/dbegalka/01-track-1
Very Happy
View user's profile Send private message Send e-mail

Dave Begalka


From:
Minnesota, USA
Post  Posted 24 Jan 2012 7:12 am     Logical place for a 2X4
Reply with quote

Thanks for all the kind words, gents.
The only excuse I have for myself is that long Minnesota winters can put strange ideas in a guy's head.
Best part about working in the 2X4 medium is there is absolutely no hesitation in bolting another piece on. Thank goodness my bandmates (and SGF brothers) have a sense of humor about my contraptions.

View user's profile Send private message Send e-mail

Jonathan Lam

 

From:
Brooklyn, NY
Post  Posted 24 Jan 2012 3:25 pm    
Reply with quote

Awesome.
View user's profile Send private message Send e-mail Visit poster's website

Carl McLaughlin


From:
St.Stephen,New Brunswick,Can
Post  Posted 24 Jan 2012 7:08 pm     Benders on 2x4
Reply with quote

Awsome,well done,for a 2x24 sounds not too shabby.I have Tom making me a new one w/ multibender,Play on..Cheers...Carl Very Happy
_________________
Now have a SX 6 string lap in G,.A Tele plus telecaster, Larrivee acoustic.Also have a Fender resonator guitar with new Quarterman cone and spider,and an Allan tailpiece.Playing through a Fender Super Champ XD,using a little delay on the amp and a Harmonix Holy Grail Echo pedal,set on Hall turned to about 1pm.Just got a Fender Dual 6 Stringmaster style. Bought a Yamaha FGX5 Recently and love it.
View user's profile Send private message Send e-mail

Carl McLaughlin


From:
St.Stephen,New Brunswick,Can
Post  Posted 24 Jan 2012 7:14 pm     2x4 bender
Reply with quote

Where can i get one of those good looking guitar stands.LOL Carl Laughing
_________________
Now have a SX 6 string lap in G,.A Tele plus telecaster, Larrivee acoustic.Also have a Fender resonator guitar with new Quarterman cone and spider,and an Allan tailpiece.Playing through a Fender Super Champ XD,using a little delay on the amp and a Harmonix Holy Grail Echo pedal,set on Hall turned to about 1pm.Just got a Fender Dual 6 Stringmaster style. Bought a Yamaha FGX5 Recently and love it.
View user's profile Send private message Send e-mail

Jim Davies


From:
Charlottesville VA
Post  Posted 25 Jan 2012 2:21 pm    
Reply with quote

This is the coolest thing I've seen and heard in a long time.
View user's profile Send private message Send e-mail Visit poster's website

Bud Angelotti


From:
Larryville, NJ, USA
Post  Posted 25 Jan 2012 7:11 pm    
Reply with quote

This is awesome !
View user's profile Send private message Send e-mail Visit poster's website

Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 25 Jan 2012 8:28 pm    
Reply with quote

Dave, very cool! I like it.
Cool
Two questions: What is the scale length? And what does the sticker on the headstock say?
Keep up the good work! Do Less With Less!
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website

Peter Jacobs


From:
Northern Virginia
Post  Posted 26 Jan 2012 6:35 am    
Reply with quote

One more question, Dave - how'd you join the sides to the main piece -- just glue, dowels, biscuits, rebar?
_________________
Peter
---------
www.splinterville.com
YouTube: https://www.youtube.com/@splinterville6278/videos
View user's profile Send private message Send e-mail

Dave Begalka


From:
Minnesota, USA
Post  Posted 26 Jan 2012 7:07 am    
Reply with quote

Michael Maddex wrote:
Dave, very cool! I like it.
Cool
Two questions: What is the scale length? And what does the sticker on the headstock say?
Keep up the good work! Do Less With Less!

Thanks again, friends. Michael, the scale length is 25.5" though I bet shorter (with less tension) would be better for bending.
The sticker says Lapro. That's a brand name that was using on some lap steels with wood resonator cones I built a couple years ago. Still have remnants of that project laying around...


Just saw your post, Peter. Wish I would have thought to go with rebar but it's actually just pocket-screws. (Kreg jig)
View user's profile Send private message Send e-mail

Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 26 Jan 2012 7:45 am    
Reply with quote

Dave Begalka wrote:
. . . The sticker says Lapro. That's a brand name that was using on some lap steels with wood resonator cones I built a couple years ago. . . .

Thanks for the info,Dave. I thought that I recognized the 'salad bowl reso' in your avatar. Cool
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website

Eric Watts

 

From:
Indiana, USA
Post  Posted 25 Nov 2016 7:46 am    
Reply with quote

Dave, are you still using your 2x4 lap steel? And have you got any pictures of your "Hingebender" to see how you routed the string under the pin..
View user's profile Send private message Send e-mail

David M Brown


From:
California, USA
Post  Posted 25 Nov 2016 8:04 am    
Reply with quote

Nice work - very cool to see such a DIY instrument.

that's quite a stand, too.
View user's profile Send private message Send e-mail Visit poster's website

Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 25 Nov 2016 8:43 am    
Reply with quote

If Menards doesn't have it, you don't need it! Laughing Laughing
View user's profile Send private message Send e-mail

Bill OCallaghan

 

From:
Trenton, NJ USA
Post  Posted 26 Nov 2016 6:22 pm    
Reply with quote

That is really awesome Dave.
_________________
Carter S-10
Morrell Little Roy Wiggins 8 string
1938? Kalamazoo KEH-150 lap steel
View user's profile Send private message Send e-mail

Mike McBride


From:
Indiana
Post  Posted 30 Jan 2022 8:01 pm    
Reply with quote

Would love to see more detailed photos. I'd like to do the same thing.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP