Still looking for a 5 sided control plate

Ron Victoria · From: New Jersey, USA

From my post below, I am trying to restore a kalamazoo that I recently bought and want to keep. The biggest problem is the control plate. I can always make it from brass as a last resort and have it nickel plated. I've gotten a few suggestions as to pickups that will work. Should I just buy new for the pots and knobs? My other option is to leave well enough alone and just replace the pickup as the poles don't line up anyway. Someone put in a Guyatone pu for whatever reason. Thanks again, Ron

Richard Shatz · From: Quincy, IL, United States

I'll get you those measurements as soon as I can find the instrument, probably this weekend.

Richard Shatz · From: Quincy, IL, United States

This is the pickup you need. Also also has the correct bridge and cover.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=621&item=3750376655&rd=1

Ron Victoria · From: New Jersey, USA

Someone must have cut the top off of that control plate making it 6 sided unless it's not gibson. If the bidding stays low it still might be worth buying it for the pu and pots. Thanks for keeping an eye out.

Ron

Farris Currie · From: Ona, Florida, USA, R.I.P.

hello Ron,it says it's home made!no telling
what it may have! good luck
farris

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: