Author |
Topic: Emmons Sd-10 Push Pull Blue |
Gary Steele
From: Columbus, Ohio, USA
|
Posted 22 Apr 2009 3:29 pm
|
|
3 pedals they are the legrande type. Its also not a fat back. Its a cut tail.
Last edited by Gary Steele on 23 Apr 2009 5:10 pm; edited 1 time in total |
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 22 Apr 2009 3:38 pm Re: Emmons Sd-10 Push Pull Blue
|
|
Lets make this simple. I have everything except the parts that you cant see when the guitar is set up on the floor. The under carrage up under the BODY is what is missing. Also i still have to try to find the little switch plate in the middle of the body. I think it is at the guys house i got the guitar from. I dont want anymore email on this. If you cant call i dont want to talk about it. I'm tired of trying to explain this on here. I am more than glad to tell you on the phone. Sorry but all good things come to an end. Thamks alot. $1500.00 plus shipping. ALSO I FOUND A STEELER HERE IN OHIO THAT CAN MAKE MOST ALL THE PARTS YOU NEED. THE BELL CRANKS WONT BE EXACTLY THE SAME.
614-316-1267[/quote] |
|
|
|
Pat Comeau
From: New Brunswick, Canada
|
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 22 Apr 2009 6:12 pm ?????
|
|
What do you do when you cant get it to work. Send your number and i'll send a pic over phone. |
|
|
|
Pat Comeau
From: New Brunswick, Canada
|
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 22 Apr 2009 6:33 pm pics
|
|
Pat the only pics i have is on my phone. I cant get pics loaded from my phone to the computer either. I just wrapped everything up in news paper for extra protection for shipping. I'll unrap it if i have to. A guy was suppose to take it and decided to decline. Its a very nice piece, I played it 6 months ago before the guy stripped it to put parts on his old old old Laquer body. I have put off for a long time making myself take time to figure all this out to post pics. Hopefully i'm getting closer.
Gary |
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 23 Apr 2009 5:09 pm Re: Emmons Sd-10 Push Pull Blue
|
|
Gary Steele wrote: |
I found the Mounting plate for pickup and now i have another matching knee lever with a total of 4 knees.
Still For Sale, deal fell thru.
I have most everything except the under carriage. also have case.I have changer and the axle. and i havent found the piece in the middle of neck where the switch goes i think it is around also, I should be able to come up with it. $1500.00 plus shipping. ALSO I FOUND A STEELER HERE IN OHIO THAT CAN MAKE MOST ALL THE PARTS YOU NEED. THE BELL CRANKS WONT BE EXACTLY THE SAME. Also its not a fat back, It is the cut tail.
614-316-1267 |
|
|
|
|
b0b
From: Cloverdale, CA, USA
|
Posted 23 Apr 2009 6:11 pm
|
|
Try using a camera to take pictures.
Tell me this: Is it playable? Or is this a "parts kit" that the buyer will have to assemble? So far there simply isn't enough information in this ad. A picture would be a thousand times better than quoting your original post again. _________________ -πππ- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Ulf Edlund
From: UmeΓ₯, Sweden
|
Posted 26 Apr 2009 7:58 am
|
|
I believe Gary have told us a couple of times it's in pieces. Even though pics of a disassmbled guitar won't give a clear picture of what's not there it would sure help.
Check your PM's Gary. _________________ 1983 Emmons D10 SKH, Carter SD10, Nashville 112, Session 500, ProfexII, Lapsteels, GT-Beard reso, guitars of all kinds...
http://www.myspace.com/ulfedlund |
|
|
|
b0b
From: Cloverdale, CA, USA
|
Posted 26 Apr 2009 9:42 am
|
|
I am asking as the moderator, Ulf.
If this is a collection of parts, not an assembled instrument, it doesn't belong in the "For Sale: Instruments" section. It belongs in "For Sale: Amps and Accessories - Amplifiers, effects, recording equipment, seats, racks, parts, or anything else."
Gary has said that the undercarriage is missing, but he has not said whether the guitar is assembled or not. That's what I'm trying to find out. An instrument is more than a box of parts. Selling a box of parts and calling it an Emmons Push-Pull would be very misleading. _________________ -πππ- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 26 Apr 2009 8:54 pm ???
|
|
Bob, I explained all about this guitar. You can put it where ever you want it. It should be sold shortly. Several people is interested.
Thanks, Gary
Last edited by Gary Steele on 27 Apr 2009 4:52 am; edited 2 times in total |
|
|
|
Gary Steele
From: Columbus, Ohio, USA
|
Posted 27 Apr 2009 4:49 am Re: ???
|
|
Just call if you are interested in the guitar and i'll answer any questions you have. I had it sold and the guy said he never had time to do this project.
Thanks for looking.
Gary |
|
|
|
b0b
From: Cloverdale, CA, USA
|
Posted 27 Apr 2009 7:53 am
|
|
I've closed this because it appears to me that this is a box of parts, not a real Emmons SD-10 Push Pull as the title indicates. _________________ -πππ- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|