Search found 417 matches

It was one of the earlier designs which ultimately led to the final development of the X-10 and X12 pickups.

There were some 15 design models in that process, each one contributing one or more char ...

Greg,
I just noticed that you posted that your wall wart says AC/DC. This pertains to the INPUT to the wall-wart, NOT the output. It is commonplace for power supplies to operate properly with both AC ...

Greg,
In past years, quite a few of the players who use the Telonics TCA500 series amplifiers equipped with a 1U rack slot for effects units chose to use the low-cost Lexicon MX200 as a starter-level ...

Congratulations Larry, you nailed it!
The adjustments you made, as shown in the above photo, are right on the money/just what we would expect with your guitar. You have provided an increasing amount ...

The gauss field on Telonics pickups is much higher than many other pickups. As a result, musicians who are accustomed to a certain (historical) distance from the top of the poles to the bottom of the ...

JD With Nokie touring in Japan = Sleepwalk (never cleaner):

https://www.youtube.com/watch?v=LYCs5uA6lmE

Various:

https://www.youtube.com/watch?v=eEjxtWvA4rc

https://www.youtube.com/watch?v ...

JD was Marty Robbins guitar player and personal friend for over seven years.
Not only was he frightenly good on his instrument, he genuinely loved to bring joy to people through his music. I don't be ...

The AUX input is a TRS (stereo) input designed to sum the two input channels of a LINE LEVEL signal together for the purpose of playing stereo backing tracks or other program material through the ampl ...

I have a musical friend who is taking up the pedal steel, he currently has an S-10. He is seriously looking for one of the little old picking practice necks (10 tuning keys - for string tension only, ...

Nick,
Just for the sake of accuracy, the Telonics speakers are unrelated to the Deltalite.
The Deltalite was one of many existing drivers which were tested and studied prior to embarking on a 2 1/2 ...

Tom thanks for looking into this.
That web page data is very old; in fact it seems to be a page that was put up before the introduction of the TSNEO 12-8, and, now that I look at it, I am reminded t ...

Tom, there has never been a discussion or even a thought of discontinuing our speakers here at Telonics.

If such a rumor is circulating somewhere, it is incorrect.

Marty, I think it was Stephen Gerrard who did a nice job of explaining this with regard to it's use in recording - as follows:

"Serial compression is when the compressor is inserted in the s ...

Billy,
Using the DC resistance of a single-coil pickup has always been one way to approximate something about the sound quality you might expect to hear - in general.

However, we (like Bill Lawren ...

OK Jack, Iâ€™ll try - here goes.

Yes it is very new. Although we have been working with it (and other new designs) for over a year, it was just recently released in limited numbers within the ...

The organization and staff of the former d2f cover company is now known as CFM:

Commercial Fabric Manufacturing (CFM),

and can be reached at 206 682-1082

Other than a change in the lettering ...

Thanks for the update Jeff, glad you are enjoying your Telonics gear - that's what it's all about for us!

Good to hear from you Wally, now we know the show will be a good one! You'll have to update ...

Everyone here is chomping at the bit!
We'll have a full crew of engineers, technicians, specialists and coordinators on hand to accommodate questions, updates, downloads, etc.
It's a hectic flurry o ...

Once again, Telonics will be supplying amplifiers, pedals and other equipment for both the main stage and the non-pedal shows. In addition, a number of vendors will have our amps and pedals on hand fo ...

Richard,
Sorry for your inconvenience, please see my post above - the same goes for you. Contact us at your convenience and we'll take care of it.
Dave

Rick, this topic has come up many many times in the past and measuring individual string levels has been done at least as many times. The problem of consistent string excitation has likewise been reso ...

Rick,
We had a batch of material on the early 84 pickups that grabbed the adjustable poles too tightly, we thought we had caught them all but it sounds like the problem you are seeing.

If you wish ...

David,

Since your TC Electronics G Major 2 EFX unit came in your Telonics Combo amplifierâ€™s 1U EFX rack, we will be glad to replace it at no charge even though it is out of TCâ€™s one y ...

There is no charge for such lifetime service and we also install any new software, firmware or taper updates at the same time. As a result, most people prefer to have our tech's make the change at sho ...

The power handling of the JBL D series was much lower than most people think - see the actual data/app bulletin.
If the low heat dissipation of the voice coil didn't fry it, it was not uncommon to ru ...

Author	Message
Topic: Telonics 610PW Humbucker
Dave Beaty Replies: 4 Views: 1978	Forum Section: For Sale: Amps and Accessories Posted: 6 Jan 2022 1:00 pm Subject: 610-pw
Dave Beaty Replies: 4 Views: 1978	It was one of the earlier designs which ultimately led to the final development of the X-10 and X12 pickups. There were some 15 design models in that process, each one contributing one or more char ...
Topic: Lexicon mx200 Fixed
Dave Beaty Replies: 13 Views: 3755	Forum Section: Electronics Posted: 18 Feb 2021 9:56 am Subject: Confusion about input and output on MX200 wall wart
Dave Beaty Replies: 13 Views: 3755	Greg, I just noticed that you posted that your wall wart says AC/DC. This pertains to the INPUT to the wall-wart, NOT the output. It is commonplace for power supplies to operate properly with both AC ...
Topic: Lexicon mx200 Fixed
Dave Beaty Replies: 13 Views: 3755	Forum Section: Electronics Posted: 18 Feb 2021 9:43 am Subject: MX200 - Two models, one AC, one DC
Dave Beaty Replies: 13 Views: 3755	Greg, In past years, quite a few of the players who use the Telonics TCA500 series amplifiers equipped with a 1U rack slot for effects units chose to use the low-cost Lexicon MX200 as a starter-level ...
Topic: Telonics pickup pole adjustments?
Dave Beaty Replies: 27 Views: 9597	Forum Section: Pedal Steel Posted: 17 Feb 2021 7:20 pm Subject: Perfect!
Dave Beaty Replies: 27 Views: 9597	Congratulations Larry, you nailed it! The adjustments you made, as shown in the above photo, are right on the money/just what we would expect with your guitar. You have provided an increasing amount ...
Topic: Telonics pickup pole adjustments?
Dave Beaty Replies: 27 Views: 9597	Forum Section: Pedal Steel Posted: 4 Feb 2021 8:30 pm Subject: Consideratios related to pole adjustment-Telonics pickups
Dave Beaty Replies: 27 Views: 9597	The gauss field on Telonics pickups is much higher than many other pickups. As a result, musicians who are accustomed to a certain (historical) distance from the top of the poles to the bottom of the ...
Topic: Ex-Venture hot picker JD Hoag
Dave Beaty Replies: 11 Views: 6777	Forum Section: Gone Home Posted: 12 May 2020 4:16 pm Subject: JD at "work"
Dave Beaty Replies: 11 Views: 6777	JD With Nokie touring in Japan = Sleepwalk (never cleaner): https://www.youtube.com/watch?v=LYCs5uA6lmE Various: https://www.youtube.com/watch?v=eEjxtWvA4rc https://www.youtube.com/watch?v ...
Topic: Ex-Venture hot picker JD Hoag
Dave Beaty Replies: 11 Views: 6777	Forum Section: Gone Home Posted: 12 May 2020 3:59 pm Subject: JD - Marty's Guitar Man
Dave Beaty Replies: 11 Views: 6777	JD was Marty Robbins guitar player and personal friend for over seven years. Not only was he frightenly good on his instrument, he genuinely loved to bring joy to people through his music. I don't be ...
Topic: Telonics TC500c Auxiliary Input
Dave Beaty Replies: 6 Views: 2022	Forum Section: Electronics Posted: 21 Jun 2019 11:14 am Subject: AUX Input on Telonics TCA500 series Amplifiers
Dave Beaty Replies: 6 Views: 2022	The AUX input is a TRS (stereo) input designed to sum the two input channels of a LINE LEVEL signal together for the purpose of playing stereo backing tracks or other program material through the ampl ...
Topic: Picking Practice Neck
Dave Beaty Replies: 0 Views: 477	Forum Section: Wanted To Buy Posted: 2 Nov 2018 2:30 pm Subject: Picking Practice Neck
Dave Beaty Replies: 0 Views: 477	I have a musical friend who is taking up the pedal steel, he currently has an S-10. He is seriously looking for one of the little old picking practice necks (10 tuning keys - for string tension only, ...
Topic: eminence Deltalite
Dave Beaty Replies: 7 Views: 2926	Forum Section: Electronics Posted: 22 Jun 2018 3:56 pm Subject: Different Drivers
Dave Beaty Replies: 7 Views: 2926	Nick, Just for the sake of accuracy, the Telonics speakers are unrelated to the Deltalite. The Deltalite was one of many existing drivers which were tested and studied prior to embarking on a 2 1/2 ...
Topic: New Telonics NEO 8 ohm, 12 Inch Speaker Released
Dave Beaty Replies: 29 Views: 24489	Forum Section: For Sale: Amps and Accessories Posted: 5 Jun 2018 4:16 pm Subject: No breaks in production of Telonics TSNEO12-8 speakers
Dave Beaty Replies: 29 Views: 24489	Tom thanks for looking into this. That web page data is very old; in fact it seems to be a page that was put up before the introduction of the TSNEO 12-8, and, now that I look at it, I am reminded t ...
Topic: New Telonics NEO 8 ohm, 12 Inch Speaker Released
Dave Beaty Replies: 29 Views: 24489	Forum Section: For Sale: Amps and Accessories Posted: 4 Jun 2018 8:03 pm Subject: Incorrect assumption
Dave Beaty Replies: 29 Views: 24489	Tom, there has never been a discussion or even a thought of discontinuing our speakers here at Telonics. If such a rumor is circulating somewhere, it is incorrect.
Topic: What device strictly for sustain?
Dave Beaty Replies: 16 Views: 3948	Forum Section: Electronics Posted: 1 Jun 2018 2:07 pm Subject: Serial vrs Parallel Compression
Dave Beaty Replies: 16 Views: 3948	Marty, I think it was Stephen Gerrard who did a nice job of explaining this with regard to it's use in recording - as follows: "Serial compression is when the compressor is inserted in the s ...
Topic: Gold Standard Pickup, from Telonics
Dave Beaty Replies: 20 Views: 12613	Forum Section: Electronics Posted: 22 Mar 2018 2:40 pm Subject: Resistance readings with Telonics pickups
Dave Beaty Replies: 20 Views: 12613	Billy, Using the DC resistance of a single-coil pickup has always been one way to approximate something about the sound quality you might expect to hear - in general. However, we (like Bill Lawren ...
Topic: Gold Standard Pickup, from Telonics
Dave Beaty Replies: 20 Views: 12613	Forum Section: Electronics Posted: 22 Mar 2018 12:41 pm Subject: Here goes....
Dave Beaty Replies: 20 Views: 12613	OK Jack, Iâ€™ll try - here goes. Yes it is very new. Although we have been working with it (and other new designs) for over a year, it was just recently released in limited numbers within the ...
Topic: D2F style amp cover
Dave Beaty Replies: 7 Views: 1210	Forum Section: Wanted To Buy Posted: 21 Mar 2018 2:45 pm Subject: Contact information for CFM, formerly d2f covers
Dave Beaty Replies: 7 Views: 1210	The organization and staff of the former d2f cover company is now known as CFM: Commercial Fabric Manufacturing (CFM), and can be reached at 206 682-1082 Other than a change in the lettering ...
Topic: Telonics at the TSGA show in Irving, Texas March 8-11
Dave Beaty Replies: 15 Views: 4421	Forum Section: Upcoming Event Announcements Posted: 5 Mar 2018 4:12 pm Subject: Thanks
Dave Beaty Replies: 15 Views: 4421	Thanks for the update Jeff, glad you are enjoying your Telonics gear - that's what it's all about for us! Good to hear from you Wally, now we know the show will be a good one! You'll have to update ...
Topic: Telonics at the TSGA show in Irving, Texas March 8-11
Dave Beaty Replies: 15 Views: 4421	Forum Section: Upcoming Event Announcements Posted: 5 Mar 2018 8:11 am Subject: Can't wait!
Dave Beaty Replies: 15 Views: 4421	Everyone here is chomping at the bit! We'll have a full crew of engineers, technicians, specialists and coordinators on hand to accommodate questions, updates, downloads, etc. It's a hectic flurry o ...
Topic: Telonics at the TSGA show in Irving, Texas March 8-11
Dave Beaty Replies: 15 Views: 4421	Forum Section: Upcoming Event Announcements Posted: 2 Mar 2018 3:09 pm Subject: Telonics at the TSGA show in Irving, Texas March 8-11
Dave Beaty Replies: 15 Views: 4421	Once again, Telonics will be supplying amplifiers, pedals and other equipment for both the main stage and the non-pedal shows. In addition, a number of vendors will have our amps and pedals on hand fo ...
Topic: Telonics 84 Adjustments
Dave Beaty Replies: 9 Views: 2533	Forum Section: Pedal Steel Posted: 8 Feb 2018 12:15 pm Subject: Pickup
Dave Beaty Replies: 9 Views: 2533	Richard, Sorry for your inconvenience, please see my post above - the same goes for you. Contact us at your convenience and we'll take care of it. Dave
Topic: Volume of each string
Dave Beaty Replies: 8 Views: 2069	Forum Section: Pedal Steel Posted: 7 Feb 2018 10:47 am Subject: Measuring string levels with the ear or with instruments
Dave Beaty Replies: 8 Views: 2069	Rick, this topic has come up many many times in the past and measuring individual string levels has been done at least as many times. The problem of consistent string excitation has likewise been reso ...
Topic: Telonics 84 Adjustments
Dave Beaty Replies: 9 Views: 2533	Forum Section: Pedal Steel Posted: 6 Feb 2018 6:21 pm Subject: Tight poles in Type 84 pickup
Dave Beaty Replies: 9 Views: 2533	Rick, We had a batch of material on the early 84 pickups that grabbed the adjustable poles too tightly, we thought we had caught them all but it sounds like the problem you are seeing. If you wish ...
Topic: MX200 Lexicon settings
Dave Beaty Replies: 8 Views: 2409	Forum Section: Electronics Posted: 29 Jan 2018 12:36 pm Subject: MX200 Patches for use with Telonics TC500 Amplifiers
Dave Beaty Replies: 8 Views: 2409	David, Since your TC Electronics G Major 2 EFX unit came in your Telonics Combo amplifierâ€™s 1U EFX rack, we will be glad to replace it at no charge even though it is out of TCâ€™s one y ...
Topic: Telonics VP height
Dave Beaty Replies: 4 Views: 1943	Forum Section: Electronics Posted: 27 Jan 2018 9:47 am Subject: Changing the Axle position on Telonics pedals
Dave Beaty Replies: 4 Views: 1943	There is no charge for such lifetime service and we also install any new software, firmware or taper updates at the same time. As a result, most people prefer to have our tech's make the change at sho ...
Topic: JBL D120 clone recommendations
Dave Beaty Replies: 28 Views: 23367	Forum Section: Electronics Posted: 26 Jan 2018 10:52 pm Subject: The original JBL D130 Maximum Power Rating Specification
Dave Beaty Replies: 28 Views: 23367	The power handling of the JBL D series was much lower than most people think - see the actual data/app bulletin. If the low heat dissipation of the voice coil didn't fry it, it was not uncommon to ru ...